Samsung 16ppm Multifonction laser mono SCX-4500 (SCX-4500/SEE ) - Manuel de l'utilisateur 7.21 MB, pdf, Anglais
Samsung 16ppm Multifonction laser mono SCX-4500 (SCX-4500/SEE ) - Manuel de l'utilisateur 7.21 MB, pdf, Anglais
Samsung 16ppm Multifonction laser mono SCX-4500 (SCX-4500/SEE ) - Manuel de l'utilisateur 7.21 MB, pdf, Anglais
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Press the top cover lever, completely open the top cover.<br />
7 Press the top cover lever, completely open the top cover.<br />
8 Grasp the handles on the toner cartridge and pull to remove the<br />
cartridge out of the machine.<br />
5 Hold the top cover and close it slowly and carefully, until the cover is<br />
securely latched.<br />
Caution<br />
• Do not touch the green surface, the OPC drum or the front of<br />
the toner cartridge, with your hands or any other material.<br />
Use the handle on each cartridge in or<strong>de</strong>r to avoid touching<br />
this area.<br />
• If you leave the top cover open for more than a few minutes,<br />
the OPC drum can be exposed to light. This will cause<br />
damage to the OPC drum. Close the top cover should the<br />
installation need to be halted for any reason.<br />
Note<br />
If toner gets on your clothing, wipe it off with a dry<br />
cloth and wash it in cold water. Hot water sets toner into<br />
fabric.<br />
9 Carefully take the jammed paper out of the machine.<br />
Note<br />
If the top cover is not completely closed, the machine will not<br />
operate.<br />
Caution<br />
Be careful not to pinch your fingers, since the top cover is very<br />
heavy.<br />
6 If the paper jam LED blinks, go to next step.<br />
Caution<br />
Do not touch the fuser insi<strong>de</strong> the machine. It is hot and could<br />
cause burns! The fuser's operating temperature is very hot.<br />
Take care when removing paper from the machine.<br />
9.4