Motors-D81.1-complete-English-06-2020

© Siemens 2020
■ Overview
POG 9 rotary pulse encoder
Introduction
Mounting technology
Special technology
1
Positive rotating direction
Ø115
Ø100
Ø85 h6
Ø11 k6
Ø6.5
Ø105
60°
84
G_D081_EN_00478
4
12.6
30
3
36
8
140
M20x1.5
~R98
The POG 9 rotary pulse encoder can be supplied already
mounted.
Order code G08
The POG 9 rotary pulse encoder can be retrofitted. The motor
must be prepared for this. When the motor is ordered, the option
"Prepared for mountings, center hole only", order code G40, or
the option "Prepared for mountings with shaft D16", order code
G42, must be specified (see "Mechanical version and degrees
of protection" on page 1/76). The rotary pulse encoder is not part
of the scope of supply in this case.
Manufacturer:
Baumer Hübner GmbH
Max-Dohrn-Str. 2+4
10589 Berlin, Germany
Phone +49 (30) 69003-0
Fax +49 (30) 69003-104
www.baumer.com
Email: sales@baumerhuebner.com
Mounting dimensions of POG 9 rotary pulse encoder
Technical specifications for POG 9
Mounting of encoder for temperatures below –20 °C and higher
than +40 °C available on request.
Supply voltage U B +9 V to +30 V +5 V ±5 %
Current input without load
< 100 mA
Admissible load current per output 60 mA average
300 mA peak
25 mA average
75 mA peak
Pulses per revolution 300 … 2500
Output amplitude
U High U B – 3.5 V
U Low 1.5 V
Mark space ratio 1:1 ±20 %
Operating speed
12000 rpm
Switching rate
120 kHz
Temperature range –30 to +100 °C
Degree of protection
IP56
Maximum adm. radial cantilever force 150 N
Maximum adm. axial force
80 N
Connection system
Terminal box
Weight
approx. 1.4 kg
U High 2.5 V
U Low 0.5 V
Siemens D 81.1 · 06/2020
1/97