Motors-D81.1-complete-English-06-2020

© Siemens 2020
SIMOTICS GP and SIMOTICS SD standard motors
Article No. supplements and special versions · Types of construction
Cast-iron series SIMOTICS SD 1LE15 Basic Line, 1LE16 Performance Line
Types of construction
With flange
next smallest
IM B14
2) 7)
Article No. supplement
Type
of
construction
code
letter
14th
position
of the
Article
No.
For
types
of construction
with
order
code(s)
Article
No. with
additional
identification
code -Z
Frame size
71 80 90 100 112 132 160 180 200 225 250 280 315
S/M
315 L 315 L
2-pole 4- to
8-pole
Motor version
1LE1504 Basic Line IEC IE4 $
1LE1604 Performance Line %
1LE1503 Basic Line IE3 &
1LE1603 Performance Line (
1LE1583 )
1LE1501 Basic Line IE2 *
1LE1601 Performance Line +
1LE1502 Basic Line IE1 ,
1LE1543 Basic Line
APAC IE3 -
1LE1643 Performance Line
Line
.
1LE1541 Basic Line IE2 /
1LE1523 Basic Line
Eagle NPE (NEMA) 0
Order
1LE1623 Performance Line
Line
1
1LE1 . . . - . . . . . - . ■ . . (-Z)
code
1LE1521 Basic Line NEE (NEMA) 2
EN 50347 – – – FT115 – – – – – – – – – – –
DIN 42948 – – – C 140 – – – – – – – – – – –
K P02 – – – ✓ – – – – – – – – – – – Not for: IEC IE3 )
2
IM V19
2)
L P02 – – – ✓ – – – – – – – – – – – Not for: IEC IE3 )
IM V18
M P02 – – – ✓ – – – – – – – – – – – Not for: IEC IE3 )
without
protective
cover 2)
IM V18
with
protective
cover
2) 4) 5)
IM B34
3)
M P02+
H00
– – – ✓ – – – – – – – – – – – Not for: IEC IE3 )
N P02 – – – ✓ – – – – – – – – – – – Not for: IEC IE3 )
Standard version
✓ With additional charge
O. R. Possible on request
– Not possible
1)
2)
3)
4)
5)
The types of construction IM B6/7/8, IM V6 and IM V5 with/without protective
cover are also possible as long as no stamping of these types of construction
on the rating plate is required. As standard the type of
construction IM B3 is then stamped on the rating plate. With type of construction
IM V5 with protective cover, the protective cover has to be additionally
ordered with order code H00. The protective cover is not stamped
on the rating plate.
The type of construction is stamped on the rating plate. If mounted in a different
position, the position must be specified to ensure that the condensation
drainage holes are positioned correctly.
For North America export version Eagle Line 1LE1521
NEMA Energy Efficient, types of construction with feet are not possible
for 2-pole, 4-pole and 6-pole motors 200 hp in accordance with
NEMA MG1 Table 12-11.
In combination with an encoder, it is not necessary to order the protective
cover (order code H00), as this is delivered as a protection for the encoder
as standard. In this case the protective cover is standard design (without
additional charge).
The "Standard cylindrical shaft extension (second shaft extension)" option
(order code L05) is not possible.
6)
7)
8)
9)
The types of construction IM V3 and IM V1 with/without protective cover
are also possible as long as no stamping of these types of construction on
the rating plate is required. As standard the type of construction IM B5 is
then stamped on the rating plate. With type of construction IM V1 with protective
cover, the protective cover has to be additionally ordered with
order code H00. The protective cover is not stamped on the rating plate.
The types of construction IM V19 and IM V18 with/without protective cover
are also possible as long as no stamping of these types of construction on
the rating plate is required. As standard the type of construction IM B14 is
then stamped on the rating plate. With type of construction IM V18 with
protective cover, the protective cover has to be additionally ordered with
order code H00. The protective cover is not stamped on the rating plate.
With reference to standard EN 50347, flanges that are 2 levels larger are
used with option P01 in the frame sizes 71 and 80.
When ordering frame size B7 and the required cable outlet below, option
R12 must also be ordered.
Siemens D 81.1 · 06/2020
2/107