Motors-D81.1-complete-English-06-2020

© Siemens 2020
SIMOTICS SD standard motors next generation
Dimensions
Dimension sheet generator (within the DT Configurator)
■ Overview
A dimensional drawing can be created in the "Drive Technology
Configurator" (DT Configurator) for every configurable motor.
A dimensional drawing can be requested for every other motor.
When a complete Article No. is entered with or without order
codes, a dimensional drawing can be called up under the
"Documentation" tab.
These dimensional drawings can be presented in different views
and sections and printed.
The corresponding dimension sheets can be exported, saved
and processed further in DXF format (interchange/import format
for CAD systems) or as bitmap graphics.
Online access in the Siemens Industry Mall
The DT Configurator is integrated into the Siemens Industry Mall
and can be used on the Internet without installation.
German: www.siemens.de/dt-konfigurator
English: www.siemens.com/dt-configurator
3
Siemens D 81.1 · 06/2020
3/37