Stufa 555 T C/MK per rivestimenti COSTELLAZIONI Kaminofen 555 ...

TECHNICAL DATA AND SPECIFICATIONSTecnical data• Fuel Wood or lignite conforming to DIN 51731• Aluker Interior ® refractory material resistant to hight temperatures and to thermal shocks patented by GruppoPiazzetta S.p.a.• Cast iron firebed• Extractable Ash pan• Primary air control• Cast iron rotatine hood• Union in cast iron for rotating hood• Smoke exhaust from upper, rear sides• Stove surface: 1100 cm²• Stove volume: 660 dm³• Surface area of stokehole: 1880 cm²• Wing with ceramic glass resistant up to 750 °C• Upper smoke deflector• Inclined lower smoke deflector• Multifuoco System® ventilation kit (optional)• Adjustable feet (10 cm)The following data are relevant to the measurement of the smoke stack according to the requirements of DIN 4705c UNOhinged doorsystemc UNOrise n’falldoor systemc DUEhinged doorsystemc DUErise n’falldoor system• Nominal hourly2.3 2.3 2.3kg/hconsumption2.3• Nominal output Kw 7 7 7 7• Heating capacity m³ 56-144 56-144 56-144 56-144• DIN Bauart 1 A1 A1 A1 A1• N° prova DIN 18891 Prüfbericht Nr. : FSP-Wa 1380 FSP-Wa 1380 RB-BF1-Hn 1167 FSP-Wa 1380• DIN PLUS registration no. - - P 02 XXM 11 -• Flue diameter Cm ∅18 ∅18 ∅18 ∅18• Firebox opening Cm 40x39 40x39 40x39 40x39• Weight kg ca. 290 320 200 230c UNOc DUENominal output 7 kWSmoke flow 7 g/sMedian temperature in the flue for escaping gases 260 °CMinimum pressure draught for heat convection 0.11 mbarc UNOc DUEThe nominal output of the stove is capable of providing 7 kW- in favourable conditions 144 m 3- in less favourable conditions sufficient for 84 m 3- in unfavourable conditions 56 m 3The values indicated above for the heating capacity per room follow the regulations of DIN 18893 for rooms whichare not constructed in accordance with the rules for energy efficiency.For rooms that have been constructed according to energy efficiency rules, lower calorific capacities are required.41