Stufa 555 T C/MK per rivestimenti COSTELLAZIONI Kaminofen 555 ...

Utilization of the hood casingThe monobloc unit has an internal hollow air space within which the air that heats the environment circulates. Usingspecial Piazzetta piping that connects to the existing unions on the hood, this air can be channeled into the sameroom in which the monobloc unit is installed, or into other adjacent rooms as well. Channelled within the woodstove is near the lateral and rear semi-sheared openings that must be removed with the aid of a screwdriver.Hood casingMonoblocCoveringSemi sharedConduction ofheating airExternal air intakePicture 1: Conduction of heating airPicture 2: Semi-sheared of hood casingCAUTION: IF YOU WISH TO INSTALL A, MULTIFUOCO SYSTEM® TYPE FORCED VENTILATION SYSTEM THE SEMI-SHEARED OPENINGS ARE NOT TO BE REMOVED!To decrease the thermal dispersion, this piping can be fittingly insulated with insulation which satisfies DIN 18895(§5.6.2.3). It's still necessary to verify that the piping is of non-inflammable and indeformable material.The hot air exhaust outlet is represented by grids, provided by Piazzetta (optional).CAUTION: THE POSITIONING OF THE HOT AIR EXHAUST GRIDS MUST BE ACCOMPLISHED SO THAT, WITHIN ALATERAL DISTANCE OF 30 CM AND 50 CM, NO INFLAMMABLE ELEMENTS ARE PRESENT (SEE SECTION“MINIMUM SAFETY DISTANCES”).Without using the hood casing (no multifuoco system ®)In this case, it's necessary to arrange for a hollow space between the monobloc unit and the layer of insulation onthe inner-wall, on the false ceiling and on the floor to make use of the maximum monobloc unit surface area, asprovided for in paragraph.CAUTION: IN THIS CASE, THE LAYER OF THERMAL INSULATION MUST BE COMPLETELY COVERED WITH SHEETMETAL OR ALSO GALVANIZED OR ALUMINIZED STEEL OR WITH ANCHORING POINTS AT A MAXIMUM DISTANCEOF 30 CM, TO AVOID THE DISPERSION OF TOXIC POWDERS.47