Stufa 555 T C/MK per rivestimenti COSTELLAZIONI Kaminofen 555 ...

PRELIMINARY STEPS BEFORE INATALLATIONBEFORE INSTALLING THE CENTRAL UNIT AND COVER1. Before proceeding to install the product read all the instructions contained in the section GENERALRULES.2. Fit the external ventilation system according to the directions contained in the section GENERAL RULES.3. Unpack the central unit, remove the fire-floor attachment by unscrewing the wing nuts.4. Remove the polystyrene surrounding the shields.5. Insert the supporting feet, first screwing the hexagonal nut provided.6. Adjust the height above the ground of the main unit’s fire floor by clamping the supporting foot with the nut.7. Unscrew the two side screws to unclamp the counterweights and the latch door (fig 3). This operationshould be completed BEFORE FITTING THE COVER.ATTACHING SCREWS TO BE REMOVED AT THE SIDES OF THE MAIN UNITREMOVE THESCREWPic.3 : Unclamping the counterweightspic. 4 : Fitting the collars8. In the main unit, if you require the redirection of hot air to the upper part, you should attach the collarssupplied as part of the accessories pack in the appropriate manner (fig 4).The main unit is furnished with adjustable feet which allow the variation of the height of the unit’s edge from aminimum of 35cm to a maximum of 45cm. For greater heights, insert wedges under the feet.49