Stufa 555 T C/MK per rivestimenti COSTELLAZIONI Kaminofen 555 ...

Removing the doorHinged door with internal closing systemWarning: it is recommended that the district retailer be called for this operation.To remove the door it is necessary:• to open the door;• loosen the dowel screw “A” that secures the self-closing door system;• remove the door hinge pin “B” by drawing it upwards;• remove the spring guard tube “C”, the spring tube guide bushings “D” and the spring “E”;• unscrew the dowel screw “F” and remove the spring holder pin “G”;THE DOOR IS NOW FREE AND COULD FALL OFF.• unscrew the dowel screw “H” and remove the pin “I” by drawing it downwards;• remove the door.To remount the door, follow the above procedure in the reverse order.BEACGFHIDPicture 6: Disassembly of the doorAutomatic closure of the doorIf the self-closing door system needs loading:• loosen the dowel screw “A” just a little and at the same time, in the case of a right-hand door, turn screw “B”clockwise by 1 or 2 turns. To be able to do this, tighten and loosen the stop dowel screw “A” several times;• In the case of a left-hand door, turn screw “B” counter-clockwise, tightening and loosening the stop dowelscrew A” several times.THE CLOSURE SYSTEM IS SET; ALWAYS USE GLOVES SUITABLE FOR THE OPERATIONWarning: it is recommended that the your local retailer be called for this operation.59