Register and win! B 140 R - Megaobrabiarki

Recommended detergents:ApplicationDetergentRoutine cleaning of all water resistantfloorsRM 746RM 780Routine cleaning of glossy surfaces(e.g. granite)RM 755 ESRoutine cleaning and basic RM 69 ASFcleaning of industrial floorsRoutine cleaning and basic RM 753cleaning of fine stoneware tilesRegular cleaning of sanitary RM 751tiles or for cleaning after completionof construction activitiesCleaning and disinfection in RM 732sanitary areasRemoval of coating from all alkali-resistantfloors (e.g. PVC)RM 752Removal of coating from linoleumRM 754floorsFresh water Open the cover of the fresh water reservoir. Fill fresh water (max. 60 °C) until 15 cmbelow the upper edge of the tank. Close the cover of the fresh water reservoir.NoteFill up the fresh water tank completely beforestarting up the machine to ventilate thewater supply system.Working without automatic detergentdosingWhile cleaning floors in hygiene-related areas(such as hospitals, supermarkets) andfor thoroughly cleaning very dirty floors.In appliances without the "DOSE" option. Open the cover of the fresh water reservoir. Fill up fresh water (maximum 60 °C) untilthe lower edge of filling nozzle. Add detergent. Follow dosing instructionsfor detergent. Close the cover of the fresh water reservoir.Dosing equipment for detergent (optional)Detergent is added to the fresh water onthe way to the cleaning head with the helpof a dosaging device. WarningRisk of damage to the dosing equipment.Do not add detergent to the fresh water reservoir.NoteThe dosing equipment can be used to addbetween 0.5% and 3% of detergent. Place the detergent bottle in the holderin the front on the fresh water reservoir. Close the bottle lid. Insert the suction hose of the dosingequipment into the bottle. Ensure thatthe sieve of the suction hose is lying atthe base of the bottle. Close the bottle using the lid of the dosingequipment.You can check the filling level of the bottlethrough a vertical view window.If the filling level of the detergent reachesthe bottom of the bottle: Add detergent or replace detergent bottle.CautionIf you want to change the detergent type,then first rinse the suction hose thoroughlyusing fresh water (for 60 seconds usingmaximum quantity of water and 3% dosing)in order to avoid chemical reactions.NoteWhen the detergent bottle is fully emptied,then operate the dosing equipment for 60seconds with maximum quantity of waterand 3% dosing so that the suction hose isagain fully filled up with the detergent.NoteWhile refilling or replacing the detergentbottle, hang in the suction hose of the dosingequipment into the opened fresh watertank so that no detergent drops fall on thefloor.NoteIf the fresh water tank is empty, then thefunction of adding detergent gets deactivated.The cleaning head continues to workwithout the addition of any liquid.NoteAs soon as the detergent pump starts running,this is indicated through a blinking "C"in the display.1Cleaning Programs23 41 DrivingDriving to the Place of Use.2 Scrubbing suctionWet clean the floor and vacuum up dirtwater.3 Wet scrubbingWet clean the floor and allow the detergentto react.4 VacuumingSuck in the dirt fleet.5 PolishingPolishing the floor without the applicationof liquid.6 Scrub the floor without applying water(vacuum polishing)Polish the floor without applying any fluidand suck in the polishing dust.7 Manual cleaningApply liquid detergent using the wallceiling-floornozzle (optional) and vacuumit again.Info buttonUse the Info button to select the menuitems and do the settings.– Turning the button to the right/leftscrolls through the menus forward/backward.– The selected setting gets accepted bypressing the button.DisplayContrast setting Sit on the seat and set main switch to“1”. Select the cleaning program "scrubbingsuction". Press and hold the Info key. Set main switch to “0”.The display shows the adjustments for thecontrast. Release the info button and select thecontrast by rotating the info button. Confirm the selected contrast setting bymomentarily pressing the info button.The contrast setting will be taken over andthe appliance will shut off.567EN - 623