Register and win! B 140 R - Megaobrabiarki

Faults with displayDisplay Cause RemedySeat switch broken seat switch open! Seat contact switch has not been The machine operates only if the operator is seated on theactivated.seat.Release accelerator! release throttle? The gas pedal is depressedwhen the main switch is on.Battery depleted ->charge!Descargar totalmentebateria!!Dirt reservoir full, cleaningstoppedbattery empty ->charge!battery totally discharged!sewage tank fullcleaning stopsOperating hours set to 0! operating hoursset to 0!Module temperaturehigh! Let it cool down!Drive motor hot! Let itcool down!moduletemp.high let cooldown!drive motor hot!let cool down!The discharge level of the batteryhas been reached. Cleaningunits can no longer be operated.Drives and lighting can be activated.More than the permissible batterycapacity has been utilised.All units will be switched off. Machineis no longer ready for operations.Dirt water reservoir is full.Take your foot off the accelerator before switching on themain switch. If the fault recurs, call customer service.Drive the machine to the charging station and charge thebattery.Manually unlock the front wheel brake (see "Operation /push appliance"). Move the machine slowly to the chargingstation. Charge battery.Empty the dirt water reservoir.Internal machine error while savingthe number of operatingNone, for information.hours. During restart, the operatinghours are always reset to 0.Controls are too hot.Set main switch to “0”. Wait at least 10 minutes. Set mainswitch to “1”.Drive motor has got overheateddue to a steep climb or lockedbrake.Set main switch to “0”. Wait at least 10 minutes. Set mainswitch to “1”. If possible, use the unit only on level surfaces.If required, check the functioning of the immobilisingbrake and driving pedal.Contactor open!! contactor open!! Defective controls. Set main switch to “0”. Wait at least 10 minutes. Set mainswitch to “1”.Shut down, missing bussupplyShutdown, missingbus supplyInform Customer ServiceEN - 1027