Samsung Multifunzione b/n MultiXpress SL-K7400LX (A3) (40 ppm) - User Manual_36.16 MB, pdf, ENGLISH

Installing driver over the network
7
6
Read the license agreement and click Continue.
After the installation is finished, click Close.
18
17 Click Continue.
7
Click Agree to agree to the license agreement.
8
Click Install. All components necessary for machine operations will be Linux
installed.
If you click Customize, you can choose individual components to install.
You need to download Linux software packages from the Samsung website to
9
Enter the password and click OK.
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Select Network Connected Printer(Wired or Wireless) on the Printer
10 Make sure that the machine is connected to your network and powered
Connection Type and click Continue.
1
on. Also, your machine’s IP address should have been set.
Click Add Printer button to select your printer and add it to your printer
11
list.
2
Copy Unified Linux Driver package to your system.
Click IP and Select HP Jetdirect - Socket in Protocol.
12
Open Terminal program and go to the folder that you copied the
3
package to.
Enter the machine’s IP address in the Address input field.
13
Extract the package.
4
Enter the queue name in the Queue input field. If you cannot determine
14
the queue name for your machine server, try using the default queue
Move to uld folder.
5
first.
if Auto Select does not work properly, choose Select Printer Software and
15
your machine name in Print Using.
6
Execute ” ./install.sh“ command (If you are not logged in as root,
execute the command with “sudo” as “sudo ./install.sh”).
Click Add.
16
Proceed with installation.
7
3. Network Setup
348