Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Understanding display messages<br />
Message Meaning Suggested solutions<br />
Message Meaning Suggested solutions<br />
The room temperature is<br />
not suitable for this set<br />
use. Please adjust room<br />
temperature<br />
This IP address conflicts<br />
with that of other system.<br />
Check it<br />
Toner Cartridge Failure:<br />
[error number]. Call for<br />
service<br />
The machine is in a<br />
room with improper<br />
room temperature.<br />
The IP address is used<br />
elsewhere.<br />
There is a problem in<br />
the toner cartridge.<br />
Please adjust room<br />
temperature (see<br />
"Adjustment" on page<br />
315).<br />
Check the IP address or<br />
obtain a new IP address.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Tray failure [error<br />
number]. Pull [tray<br />
number] out and insert it.<br />
Call for service if the<br />
problem persists<br />
[tray number] is not<br />
installed. Install the tray<br />
[tray number] cassette is<br />
pulled out. Insert it<br />
properly<br />
The tray is not securely<br />
connected.<br />
The tray is not properly<br />
installed.<br />
The tray is not securely<br />
latched.<br />
Reinstall the tray. If the<br />
problem persists, call for<br />
service.<br />
Reinstall the tray. If the<br />
problem persists, call for<br />
service.<br />
Close the tray until it locks<br />
into place.<br />
Toner cartridge is not<br />
compatible. Check users<br />
guide<br />
TR Failure: [error<br />
number]. Install transfer<br />
roller again<br />
Tray failure [error<br />
number]. Check Tray<br />
connection<br />
The imaging unit you<br />
have installed is not for<br />
your machine.<br />
The transfer roller is<br />
not installed.<br />
The tray is not securely<br />
connected.<br />
Install a <strong>Samsung</strong>-genuine<br />
imaging unit, designed for<br />
your machine (see<br />
"Available consumables"<br />
on page 210).<br />
Install the transfer roller. If<br />
it is already installed, try to<br />
reinstall the transfer roller.<br />
If the problem persists, call<br />
for service.<br />
Reinstall the tray. If the<br />
problem persists, call for<br />
service.<br />
[tray number] door is<br />
open. Close it<br />
UI System Failure: [error<br />
number]. Call for service<br />
802.1x authentication<br />
failed. Please Contact the<br />
System Administrator<br />
The tray door is not<br />
securely latched.<br />
There is a problem in<br />
the UI system.<br />
Fail to authenticate.<br />
Close the tray door until it<br />
locks into place.<br />
Turn the machine off and<br />
back on again. If the<br />
problem persists, call for<br />
service.<br />
Check the network<br />
authentication protocol. If<br />
the problem persists, call<br />
for service.<br />
a. Estimated cartridge life means the expected or estimated cartridge, which indicates the<br />
average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of<br />
pages may be affected by the percentage of image area, operating environment, printing<br />
interval, media type and media size.<br />
10. Troubleshooting<br />
256