Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
Samsung Multifunzione b/n MultiXpress SL-K7500GX (A3) (50 ppm) - User Manual_36.16 MB, pdf, ENGLISH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Loading originals<br />
You can load originals on the scanner glass or in the dual scan document feeder<br />
(DSDF) for copying, scanning, and faxing.<br />
1<br />
Open the DSDF.<br />
1<br />
On the scanner glass<br />
Make sure that no originals are in the DSDF. If an original is detected in the DSDF,<br />
the machine gives it priority over the original on the scanner glass. To get the<br />
best scan quality, especially for colored or gray-scaled images, use the scanner<br />
glass.<br />
When you place an original on the scanner glass, leave a little space<br />
between the edge of the scanner glass and the edge of the original.<br />
Otherwise, the machine may not scan the entire original.<br />
2<br />
Place the original face down on the scanner glass and align it with the<br />
registration guide at the top left corner of the glass.<br />
Preparing originals<br />
• Do not load paper smaller than 25 x 25 mm (1.0 x 1.0 inch) or larger than 297<br />
x 432 mm (11.7 x 17 inches).<br />
• Make sure any glue, ink, or correction fluid on the paper is completely dry<br />
before loading the original.<br />
2. Media and Tray<br />
46