und Installationsanleitung (pdf) - dz-schliesstechnik gmbh

1.1 Door terminal and terminal moduleGenerally, a 1337-10/11 door terminal or the terminal module 1370-10 (Fig. 2) is used as an emergency exit securityswitching or display device (exceptions see page 9: "Special function I …"). This features three LEDs for opticaldisplay of the operating status, a key-operated switch for all operational switching functions, the red panic buttonfor door release and, integrated in the housing, an alarm buzzer.ÑÒÓÔÔÕÓÒÑÕÖÖ1370-10The most important element of the door terminal andthe terminal module in accordance with Fig. 2 is theemergency switch, which is designed as a redilluminated panic button. This interrupts the circuit ofthe locking element when actuated and so unlocks it.At the same time, an alarm is triggered. The actuatingbutton locks into place and has to be pulled out againbefore the alarm can be reset.In the case of the door terminal 1337-10/11, the covercowl over the panic button is pressed in at the sametime, but not damaged. It can be pulled out without theneed to use any instrument and used again after thepanic button has been pulled back out.In the door terminal 1337-10, the red cap of thepanic button only is pressed in case of emergency. Toreset the emergency switch, the transparent covercowl must first be unlocked with the aid of the key (formore details, see page 8).1337-10Three LEDs indicate the current status of thelocking system:The yellow LED indicates a live alarmThe green LED indicates an unlocked doorThe red LED indicates a locked door.The key-operated switch integrated in the doorterminal or terminal module can be used to switch alloperating functions of the emergency exit securitysystem such as temporary and continuous unlocking,locking and alarm acknowledgement.48