und Installationsanleitung (pdf) - dz-schliesstechnik gmbh

Special features of the terminal module 1370-10All the switching and display functions are identical in both terminal variants 1337-XX and 1370-10. However, theterminal module 1370-10 has a number of special features.Destructive/non-destructive actuation of theemergency switchThe red cap of the emergency switch can be setin such a way that it remains undamaged whenactuated, or so that it is destroyed. The default statusis for non-destructive emergency switch actuation.To change over to destructive emergency switchactuation, the emergency switch cap must be pressedout of the cover cowling using a suitable tool - forexample a screwdriver - turned by 60° and replaced.Opening the cover cowlingThe see-through cowling of the terminal module1370-10 must be unlocked by turning the keyoperatedswitch as far as the second stopping point.After pulling out the key, it can be removed, forexample to reset the emergency switch.Note! When pressing out and replacing theemergency switch cap, only exert any pressureon the edge areas, as otherwise the centre couldunintentionally be broken out.For precise alignment of the emergency switchcap, it is fitted with two markings which each have tobe aligned to a marking in the cover cowling.Setting for none destructive actuation of theemergency buttonSetting for destructive actuation of the emergencybutton52