VTrak E-Class Product Manual - Promise Technology, Inc.

Viewing SAS Port Statistics
185
Chapter 5: Management with the CLU
There are two SAS ports on each controller. To view information about the SAS
ports:
1. From the Main Menu, highlight SAS Management and press Enter.
2. Highlight SAS Ports and press Enter.
3. Highlight the port you want to see and press Enter.
4. Highlight SAS Port Statistics and press Enter.
The statistics for the selected port appear on the screen.
Viewing SAS Initiators
There are two SAS ports on each controller, for a total of four SAS ports. To a
view a list of initiators currently logged any of the four SAS ports:
1. From the Main Menu, highlight SAS Management and press Enter.
2. Highlight SAS Initiators and press Enter.
A list of all currently logged-in initiators appears on the screen.
Adding a SAS Initiator
You must add an initiator to the VTrak’s initiator list in order to use the initiator to
create a LUN for your logical drive.
To add an initiator:
1. From the Main Menu, highlight SAS Management and press Enter.
2. Highlight SAS Initiators and press Enter.
3. Highlight the initiator you want to add and press the spacebar to select it.
4. Highlight Add Marked Initiators and press Enter.
The initiator is added to VTrak’s initiator list.