Final Fairing & Finishing - WEST SYSTEM Epoxy

Catalog No. 002-740
Final Fairing & Finishing
Techniques for fairing surfaces with WEST SYSTEM ® Epoxy
and a guide to finish coating
6th Edition—June 2010
The techniques described in this manual are based on the handling characteristics and
physical properties of WEST SYSTEM Epoxy products. Because physical properties of
resin systems and epoxy brands vary, using the techniques as described this publication
with coatings or adhesives other than WEST SYSTEM is not recommended. Refer to the
current WEST SYSTEM User Manual & Product Guide for complete product information,
and safety and handling guidelines.
The information presented herein is believed to be reliable as of publication date, but
we cannot guarantee its accuracy in light of possible new discoveries. Because West
System Inc. cannot control the use of WEST SYSTEM products in customer possession,
we do not make any warranty of merchantability or any warranty of fitness for a particular
use or purpose. In no event, shall West System Inc. be liable for incidental or consequential
damages.
WEST SYSTEM, 105 Epoxy Resin, 205 Fast Hardener, 206 Slow Hardener, G/5, G/flex,
410 Microlight and Six10 are registered trademarks of West System Inc. Scarffer, 209
Extra Slow Hardener, 207 Special Clear Hardener and 422 Barrier Coat Additive are
trademarks of West System Inc., Bay City, MI USA.
Copyright © February 1989, February 1994, September 1997, October 2001, June
2005, March 2010 by Gougeon Brothers, Inc.
Published by Gougeon Brothers, Inc., Bay City, MI USA. All Rights reserved. No part
of the contents of this book may be reproduced or transmitted in any form or by any
means without the written permission of the publisher.