Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Enfora <strong>Enabler</strong> <strong>II</strong>I-G<br />
Modem <strong>Integration</strong> <strong>Guide</strong><br />
6.6.14. Keyboard (Pins 27, 29, 31, 32, 33, 34, 36, 38, 40, 42 )<br />
The module keyboard controller implements a built-in scanning algorithm for hardware-based key press<br />
decoding and allows MPU software overhead reduction. The keyboard controller can handle up to 5 × 5<br />
keyboards, operates on a 32 kHz clock, and can generate wake-up events when the device is in sleep<br />
mode.<br />
The keyboard controller includes the following main features:<br />
• Support of multi-configuration keyboards up to 5 rows x 5 columns<br />
• Integrated programmable timer<br />
• Event detection on both key press and key release<br />
• Multi-key press detection and decoding<br />
• Long key detection on prolonged key press<br />
• Programmable time-out on permanent key press or after keyboard release<br />
Pin Name Pin Number Signal Direction Description<br />
KBC0 27 O Keyboard matrix column 0 output<br />
KBC1 33 O Keyboard matrix column 1 output<br />
KBC2 29 O Keyboard matrix column 2 output<br />
KBC3 31 O Keyboard matrix column 3 output<br />
KBC4 32 O Keyboard matrix column 4 output<br />
KBR0 38 I Keyboard matrix Row 0 input<br />
KBR1 40 I Keyboard matrix Row 1 input<br />
KBR2 42 I Keyboard matrix Row 2 input<br />
KBR3 36 I Keyboard matrix Row 3 input<br />
KBR4 34 I Keyboard matrix Row 4 input<br />
For hardware reference only. There is no generic firmware to support this function.<br />
Firmware must be added to enable Keyboard functions<br />
Keyboard Parameter/Conditions Min Typ Max Units<br />
VIH High level input voltage 1.17 1.8 1.9 V<br />
VIL Low level input voltage 0.63 V<br />
VOH High level output voltage, IO = 4 mA 1.35 1.8 V<br />
VOL Low level output voltage, IO = 4 mA 0.45 V<br />
<strong>II</strong> Input leakage current ±1 µA<br />
Iout Output current 8 mA<br />
PU PU resistance 18 kΩ<br />
PD PD resistance 90 kΩ<br />
Iz Leakage current ± 20 µA<br />
GSM0308PB001 53 Version 1.03– 7/17/2007