Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Enfora <strong>Enabler</strong> <strong>II</strong>I-G<br />
Modem <strong>Integration</strong> <strong>Guide</strong><br />
13.8.2. Specific OEM Responsibilities for Portable Products and Applications<br />
Each device or product, into which the Enfora <strong>Enabler</strong> <strong>II</strong>I-G PCS-1900 GSM transceiver has been<br />
incorporated, and which is intended to be used in an application that meets the definition of<br />
"portable" MUST be separately authorized by the FCC for the purposes of determining<br />
compliance with current FCC guidelines limiting human exposure to radio frequency radiation.<br />
Portable devices must be evaluated for RF exposure based on Specific Absorption Rate (SAR)<br />
limits; further information on such evaluations are available from the FCC via the Internet.<br />
13.8.3. Specific OEM Responsibilities for Mobile Products and Applications<br />
Separate or additional FCC approvals are NOT required for devices or products, into which the<br />
Enfora <strong>Enabler</strong> <strong>II</strong>I-G PCS-1900 GSM transceiver has been incorporated, that are used in<br />
applications that meet the definition of "mobile."<br />
For all end products, the OEM or integrator must provide instructions, warnings and labels to<br />
ensure that the product complies with current FCC guidelines limiting human exposure to radio<br />
frequency radiation.<br />
Current FCC regulations limit the EIRP of mobile devices to 2 W. Because the nominal RF output<br />
power of the Enfora <strong>Enabler</strong> <strong>II</strong>I-G GSM1900 GSM transceiver is 1.0 W (31 dBm), antenna gain<br />
for mobile products and applications cannot exceed 2 dBi.<br />
13.8.4. Specific OEM Responsibilities for Fixed Products and Applications<br />
Separate or additional FCC approvals are not required for devices or products, into which the<br />
Enfora <strong>Enabler</strong> <strong>II</strong>I-G GSM transceiver has been incorporated, that are used in applications that<br />
meet the definition of "fixed.”<br />
For all end products, the OEM or integrator must provide the instructions, warnings and labels to<br />
ensure that the product complies with current FCC guidelines limiting human exposure to radio<br />
frequency radiation.<br />
Separate or additional FCC approvals are required for devices or end products used in fixed<br />
applications where antenna gain in excess of 7dBi is desired.<br />
GSM0308PB001 86 Version 1.03– 7/17/2007