Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Enabler II-G Assiste GPS Integration Guide - Farnell
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Enfora <strong>Enabler</strong> <strong>II</strong>I-G<br />
Modem <strong>Integration</strong> <strong>Guide</strong><br />
6.6.21. Handset Microphone Bias Output (Pin 63)<br />
Mic Bias Output Parameter/Conditions Min Typ Max Units<br />
Bias Voltage on Mic(+) Set to 2.0 V 1.9 2.1 Vdc<br />
Set to 2.5 V 2.4 2.6 Vdc<br />
Mic Bias Current<br />
Capability<br />
2.0 mA<br />
6.6.22. Handset Speaker Output (Pins 71, 73)<br />
Pin Name Pin Number Signal Direction Description<br />
EARP 71 O Earphone positive output<br />
EARN 73 O Earphone negative output<br />
The earphone amplifier provides a full differential signal on the terminals EARP and EARN (Earphone).<br />
Handset Spkr Output Parameter/Conditions Min Typ Max Units<br />
Maximum Differential<br />
Resistive Load<br />
Output Swing 3.9 VPP<br />
Output Swing 1.5 VPP<br />
120<br />
33<br />
Ω<br />
Ω<br />
Maximum Differential<br />
Capacitive Load<br />
100 pF<br />
Common Mode<br />
Minimum Resistive Load<br />
At Internal Speaker (+) or (-) 200 kΩ<br />
Common Mode<br />
Maximum Capacitive<br />
Load<br />
At Internal Speaker (+) or (-) 50 pF<br />
Amplifier Gain EARG = 1<br />
1<br />
DB<br />
EARG = 0<br />
-11<br />
dB<br />
Parameter Test Conditions Min Typ Max Units<br />
Earphone output swing at<br />
EARP-EARN<br />
Distortion ≤ 2% and 120 Ω, VSP input<br />
level = +3 dBm0, amp gain = -11 dB<br />
0.98 VP-P<br />
Distortion ≤ 2% and 33 Ω, VSP input level<br />
= -5.34 dBm0, amp gain = -11 dB<br />
0.38<br />
Distortion ≤ 2% and 120 Ω, I2S input level<br />
= +3 dBm0, amp gain = -11 dB<br />
0.93<br />
Distortion ≤ 2% and 120 Ω, VSP input<br />
level = +3 dBm0, amp gain = 1 dB<br />
3.1 3.92<br />
Distortion ≤ 2% and 33 Ω, VSP input level<br />
= -5.34 dBm0, amp gain = 1 dB<br />
1.2 1.5<br />
Distortion ≤ 2% and 120 Ω, I2S input level<br />
= +3 dBm0, amp gain = 1 dB<br />
2.96 3.7<br />
Earphone amplifier gain EARG = 1 1 dB<br />
EARG = 0 -11 dB<br />
Earphone amplifier state in<br />
High<br />
power down<br />
Z<br />
Earphone amplifier power 1 kHz, 100 mVp-p<br />
supply rejection<br />
50<br />
dB<br />
GSM0308PB001 56 Version 1.03– 7/17/2007