Is it necessary to install a downhole safety valve in a subsea ... - NTNU

Is it necessary to install a downhole safety valve in a subsea oil/gas well?
8 References
1. Aleksandersen, J., Sangesland, S., Well intervention in subsea completed wells,
Department of Petroleum Engineering and Applied Geophysics, The Norwegian
Institute of Technology, The University of Trondheim, Trondheim, 1994
2. British Standard Institute (BSI), Hazard and operability studies (HAZOP
studies)- Application guide, 2001
3. Dovre Safetech, Dropped object analysis Large water depths SAGA, April 1995
4. Durham, C.J, Paveley, C.A., SPE 56934 Radical Solutions Required:
Completion Without packers and Downhole Valves Can Be Safe, Society of
Petroleum Engineers, Inc. Offshore Europe Conference, Aberdeen, Scotland, 1999
5. Goland, M., Whitson, C.H., Well Performance 2 nd edition, Prentice Hall,
Trondheim, 1991
6. Herfjord, H. J., Brønnteknologi, NKI Forlaget, Larvik, 1988
7. Holand P., Offshore Blowouts Causes and Control, Gulf Publishing Company,
Houston, TX, USA, 1997
8. Høyland, A. and Rausand, M., System Reliability Theory - Models and
Statistical Methods, John Wiley & Sons Inc., New York, 1994.
9. Kirwan, B., Ainsworth, L.K., A guide to task analysis, Taylor & Francis Ltd.,
Great Britain, 1992
10. Kletz, T.A., HAZOP AND HAZAN – Identifying and Assessing Process Industry
Hazards, The Institution of Chemical Engineers, Warwickshire, England, 1992
11. Minerals Management Service, Part 250-Oil and gas and sulphur operations in
the outer continental shelf,
12. Mobile E. & P Technical Center, Mobile completions handbook, Dallas, TX,
USA, 1996
13. Molnes E., Sundet, I., Reliability of well completion equipment – Phase II
Report. (SINTEF report no. STF75 F95051, 1996, Safety and Reliability,
SINTEF, Trondheim)
14. Molnes E., Sundet, I., Vatn, J., Reliability of well completion equipment – Main
Report. (SINTEF report no. STF75 F92019, 1992, Safety and Reliability,
SINTEF, Trondheim).
15. Molnes, E., Holand, P., Sundet, I., Vatn, J., Reliability of surface controlled Sub
Safety Valves- Phase III- Main Report. (SINTEF report no. STF75 F89030, 1989,
Safety and Reliability, SINTEF, Trondheim).
16. Molnes, E., Sundet, I., Vatn, J., Reliability of surface controlled Sub Safety
Valves- Phase IV. (SINTEF report no. STF75 F91038, 1992, Safety and
Reliability, SINTEF, Trondheim).
17. NORSOK, 1998, Subsea production systems, [online] Found at
http://www.nts.no/norsok/u/u00102/u00102.htm, 18.11.01
18. Offshore Technology, Exxon Valdez Oil Spill, [online] Found at
http://www.offshore-technology.com/contractors/environmental/exxonvaldez.html,
02.05.02
19. Rausand M., Personal conversation, Institutt for Produksjons og
Kvalitetsteknikk, NTNU, Norway, 08.02.2002
20. Rausand, M., Vatn, J., Reliability modelling of surface controlled subsurface
safety valves, Reliability Engineering and System Safety, Vol. 61, 1998
Diploma thesis, NTNU 2002
56