Doc. Num. 92/65 Ed.2 Rev.0 July 2010 Ed. 1 Rev. 1

Ed. 2 Rev. 0 ‐ Luglio 2010
HOW TO FIND A "PART" IF
YOU KNOW WHAT IT LOOKS LIKE
AND WHERE IT IS LOCATED.
1) REFER TO FIGURE 1 ON PAGE VII AND DETERMINE IN WHICH SECTION THE PART FALLS.
2) GO TO THE INDEX (PAGES IV, VI) AND IDENTIFY THE SECTION.
WITH THE HELP OF THE FIGURE, WHICH SHOWS THE VARIOUS SUB‐SECTIONS, IDENTIFY
THE RELEVANT ONE LIKELY TO CONTAIN THE REQUIRED PART AND THEN GO TO THE
PAGE INDICATED.
3) IDENTIFY THE PART IN THE DIAGRAM AND NOTE ITS INDEX NUMBER.
NB: IF YOU CANNOT FIND THE PART IN THE DIAGRAM, GO TO ANOTHER DIAGRAM
WITHIN THE SAME SECTION WHERE IT MAY APPEAR.
4) ONCE IDENTIFIED GO TO THE "DESCRIPTION" COLUMN IN THE APPROPRIATE LIST TO
CONFIRM THE FULL DESCRIPTION SO AS TO POSITIVELY IDENTIFY THE PART REQUIRED.
HOW TO ORDER PARTS:
WHEN ORDERING PARTS PLEASE FOLLOW PRECISELY THESE INSTRUCTIONS:
1) ALWAYS QUOTE THE BUILD/ SERIAL NUMBER OF YOUR PARTICULAR AIRCRAFT.
2) ALWAYS SPECIFY THE P/N (PART NUMBER), THE DESCRIPTION AND THE QUANTITY OF
EACH PART THAT YOU WISH TO ORDER.
Introduction
3