Automotive spark-ignited direct-injection gasoline engines

More documents

Recommendations

Info

560 F. Zhao et al. / Progress in Energy and Combustion Science 25 (1999) 437–562 for direct injection SI engines. Proceedings of Global Powertrain Conference on Advanced Engine Design and Performance, 1998. p. 66–75. [271] Balles EN, Ekchian JA, Heywood JB. Fuel injection characteristics and combustion behavior of a direct-injection stratified-charge engine. SAE Technical Paper, No. 841379, 1984. [272] Abraham J. Entrainment characteristics of sprays for diesel and DISI applications. SAE Technical Paper, No. 981934, 1998. [273] Alain F. et al. In-cylinder flow investigation in a gasoline direct injection four valve engine: bowl shape piston effects on swirl and tumble motions. 1998 FISITA Technical Paper, No. F98T049, 1998. [274] Arcoumanis C, et al. Optimizing local charge stratification in a lean-burn spark ignition engine. IMechE 1997;D211:145– 54. [275] Arcoumanis C et al. Modeling of pressure-swirl atomizer for gasoline direct-injection engines. SAE Technical Paper, No. 1999-01-0500, 1999. [276] Automotive Engineer. Healthy future of GDI predicted by Mitsubishi. Automotive Engineer 1997;12:6. [277] Automotive Engineer. Toyota’s D4 direct injection gasoline engine. Automotive Engineer 1997;12:60. [278] Automotive Engineer. Nissan develops new direct injection engines. Automotive Engineer 1997;22(9):6. [279] Automotive Engineer. Getting more direct. Automotive Engineer 1997;12(9):81. [280] Bartolini CM et al. Experimental analysis of a new water hammer gasoline direct injection system. SAE Technical Paper, No. 981936, 1998. [281] Birch S. Gasoline direct-injection developments. Automotive Engineering 1988:88. [282] Bladon S. Carisma GDI vs. Rover 420 DI, Diesel Car & 4 × 4, No. 1, 1998, p. 36–42. [283] Brooks B. Nissan to direct-inject VQ engines. Ward’s Engine and Vehicle Technology Update 1997;August 15:15. [284] Brooks B. DI gasoline engine problems outlined. Ward’s Engine Update 1998;February 1:2. [285] Brooks B. Daimler-Benz may use Orbital/Siemens DI. Ward’s Engine Update 1998;July 15:3. [286] Burk P et al. Future aftertreatment strategies for gasoline lean burn engines. Proceedings of AVL Engine and Environment Conference, 1997. p. 219–31. [287] Carnevale C. Cylinder to cylinder AFR control with an asymmetrical exhaust manifold in a GDI system. SAE Technical Paper, No. 981064, 1998. [288] Chaouche A et al. NSDI-3: a small bore GDI engine. SAE Technical Paper, No. 1999-01-0172. 1999. [289] Chinn J, Yule A. Computational analysis of swirl atomizer internal flow. Proceedings of ICLASS-97, 1997. [290] Choi N et al. Effect of in-cylinder air motion on fuel spray characteristics in a gasoline direct injection engines. SAE Technical Paper, No. 1999-01-0177, 1999. [291] Cole R. Exhaust emissions of a vehicle with a gasoline directinjection engine. SAE Technical Paper, No. 982605, 1998. [292] Cole R. Gaseous and particulate emissions from a vehicle with a spark-ignition direct-injection engine. SAE Technical Paper, No. 1999-01-1282, 1999. [293] Cousin J, Ren W, Nally S. Transient flows in high pressure swirl injectors. SAE Technical Paper, No. 980499, 1998. [294] Daisho Y, Shimizu A, Saito, T, Choi KH. A fundamental study on charge stratification. Proceedings of COMODIA- 85, 1985. pp. 423–32. [295] Davy MH. Effects of injection timing on liquid-phase fuel distributions in a centrally-injected four-valve direct-injection spark-ignition engine. SAE Technical Paper, No. 982699, 1998. [296] El-Emams SH et al. Performance of a stratified charge sparkignition engine with an injection of different fuels. Proceedings of the Fourth International Symposium COMODIA 98, 1998. p. 329–34. [297] Ellzey J. Simulation of stratified charge combustion. SAE Technical Paper, No. 981454, 1998. [298] Fan L et al. Comparison of computed spray in a direct-injection spark-ignited engine with planar images. SAE Technical Paper, No. 972883, 1997. [299] Fan L et al. Intake flow simulation and comparison with PTV measurements. SAE Technical Paper, No. 1999-01-0176, 1999. [300] Farrell P et al. Intake air velocity measurements for a motored direct injection spark ignited engine. SAE Technical Paper, No. 1999-01-0499, 1999. [301] Faure MA et al. Application of LDA and PIV techniques to the validation of a CFD Model of a direct injection gasoline engine. SAE Technical Paper, No. 982705, 1988. [302] Fujikawa T et al. Quantitative 2-D fuel distribution measurements in a direct-injection gasoline engine using laserinduced fluorescence technique. Proceedings of the Fourth International Symposium COMODIA 98, 1998. p. 317– 22. [303] Fukushima C. Mitsubishi clears California NOx requirement with new version of GDI engine, plans U.S. launch. The Japan Automotive Digest 1997;III:37. [304] Gajdeczko B et al. Application of two-color particle image velocimetry to a firing production direct-injection stratifiedcharge engine. SAE Technical Paper, No. 1999-01-1111, 1999. [305] Ghandhi J. Observations of stratified combustion in an engine and constant volume bomb. Proceedings of Direkteinspritzung im Ottomotor, 1998. p. 147–65. [306] Glaspie CR, Jaye J, Lawrence TG, Lounsberry TH, Mann LB, Opra JJ, Roth DR, Zhao F-Q. Application of design and development techniques for direct injection spark ignition engines. SAE Technical Paper, No. 1999-01- 0506, 1999. [307] Han Z et al. Multidimensional modeling DI gasoline engine sprays. Proceedings of ILASS-America, 1997. p. 75–9. [308] Han Z et al. Internal structure of vaporizing pressure-swirl fuel sprays. Proceedings of ICLASS-97, 1997. p. 474–81. [309] Heisler H. Advanced engine technology. SAE, 1995. [310] Heitland H et al. Can the best fuel economy of today’s engines still be improved? SAE Technical Paper, No. 981912, 1998. [311] Hepburn J et al. Engine and aftertreatment modeling for gasoline direct injection, SAE 982596, 1998. [312] Hoffman J, Khatri F, Martin J. Mass-related properties of various atomizers for direct-injection SI engines. SAE Technical Paper, No. 980500, 1998. [313] Ikeda Y et al. Development of NOx storage-reduction 3-way catalyst for D-4 engines. Proceedings of the 1998 JSAE Fall
F. Zhao et al. / Progress in Energy and Combustion Science 25 (1999) 437–562 561 Meeting (in Japanese), No. 101-98, Paper No. 9839597, 1998. p. 9–12. [314] Ikeda Y et al. Development of NO x storage-reduction 3-way catalyst for D-4 engines. SAE Technical Paper, No. 1999-01- 1279, 1999. [315] Ismailov M et al. Laser-based techniques employed on gasoline swirl injector. Proceedings of the Fourth International Symposium COMODIA 98, 1998. p. 499–504. [316] Jeong K et al. Initial flame development under fuel stratified conditions. SAE Technical Paper, No. 981429, 1998. [317] Johnson D et al. Electronic direct fuel injection system applied to an 1100cc two-stroke personal watercraft engine. SAE Technical Paper, No. 980756, 1998. [318] Jost K. Direct injection for SI engines. Automotive Engineering 1997;May:60–1. [319] Kano M, Saito K, Basaki M, Matsushita S, Gohno T. Analysis of mixture formation of direct injection gasoline engine. SAE Technical Paper, No. 980157, 1998. [320] Kato S et al. Quantitative measurement of air–fuel mixture distribution in a cylinder using LIF. Proceedings of SAE- Japan (in Japanese), No. 9738823, October 1997. [321] Kawamura K et al. Development of instrument for measurement of air-fuel ratio in vicinity of spark plug—applications to DI gasoline engine. Proceedings of the 14th Japan Internal Combustion Engine Symposium (in Japanese), 1997. p. 133–8. [322] Kech JM et al. Analyses of the combustion process in a direct injection gasoline engine. Proceedings of the 4th International Symposium COMODIA 98, 1998. p. 287–92. [323] Kobayashi T et al. Development of NO x trap type catalyst for direct injection gasoline engine. SAE Technical Paper, No. 1999-01-1468, 1999. [324] Koike M et al. Influences of fuel vaporization on mixture preparation of a DI gasoline engine. Proceedings of the 1998 JSAE Spring Convention (in Japanese), No. 982, Paper No. 9832378, 1998, p. 103–6. [325] Lacher S et al. In-cylinder mixing rate measurements. SAE Technical Paper, No. 1999-01-1110, 1999. [326] Lai M-C et al. Characteristics of direct injection gasoline spray wall impingement at elevated temperature conditions. Proceedings of the 12th Annual Conference on Liquid Atomization and Spray Systems, May 1999. [327] Lenz U et al. Air–fuel ratio control for direct injecting combustion engines using neutral networks. SAE Technical Paper, No. 981060, 1998. [328] Lewis A. Mitsubishi GDI, Diesel Car and 4 × 4, No. 12, 1997. p. 20–1. [329] Li J, Chae J, Jeong Y, Lee S, Zeng K, Cho M, Noh J. Preliminary investigation of a diffusing oriented spray stratified combustion system for DI gasoline engines. SAE Technical Paper, No. 980150, 1998. [330] Li SC, Gebert K. Spray characterization of high pressure gasoline fuel injectors with swirl and non-swirl nozzles. SAE Technical Paper, No. 981935, 1998. [331] Lykowski J. Spark plug technology for gasoline direct injection GDI engines. SAE Technical Paper, No. 980497, 1998. [332] Morello L et al. Global approach to the fuel economy improvement in passenger cars. International Symposium on Powertrain Technologies for a 3-Litre-Car, 1996. p. 33– 43. [333] Moriyoshi Y, Takagi M. Control of flow field during compression stroke by that of intake flow. Proceedings of the Japan 13th Internal Combustion Engine Symposium (in Japanese), 1997. p. 299–304. [334] Moriyoshi Y, Nomura H. Combustion characteristics of a direct injection gasoline engine with enhanced gas motion. Proceedings of JSAE Spring Convention (in Japanese), No. 971, 1997. p. 341–4. [335] Moriyoshi Y et al. Analysis of flame propagation phenomenon in simplified stratified charge conditions. Proceedings of JSAE Fall Convention (in Japanese), No. 976, 1997. p. 17–20. [336] Moriyoshi Y et al. Combustion analysis of a direct injection gasoline engine from theoretical and experimental viewpoints. Proceedings of the 14th Japan Internal Combustion Engine Symposium (in Japanese), 1997. p. 127–32. [337] Morris SW. The evaluation of performance enhancing fluids and the development of measurement and evaluation techniques in the Mitsubishi GDI engine. SAE Technical Paper, No. 1999-01-1496, 1999. [338] Muller W et al. Durability aspects of NOx absorption catalysts for direct injection gasoline vehicles with regard to European application. SAE Technical Paper, No. 1999-01- 1285, 1999. [339] Naitoh K et al. Numerical simulation of the fuel mixing process in a direct-injection gasoline engine. Proceedings of the 14th Japan Internal Combustion Engine Symposium (in Japanese), 1997. p. 139–43. [340] Naitoh K et al. Numerical simulation of the fuel mixing process in a direct-injection gasoline engine. SAE Technical Paper, No. 981440, 1998. [341] Ohm I et al. Initial flame development under fuel stratified conditions. SAE Technical Paper, No. 981429, 1998. [342] Ohyama Y et al. Mixture formation in gasoline direct injection engine. Proceedings of Direkteinspritzung im Ottomotor, 1998, p. 79–106. [343] Parrish SE et al. Intake flow effects on fuel sprays for directinjection spark-ignited engines. Proceedings of the Fourth International Symposium COMODIA 98, 1998. p. 311–6. [344] Piccone A et al. Strategies for fuel economy improvement of gasoline powertrains. International Symposium on Powertrain Technologies for a 3-Litre-Car, 1996. p. 77–93. [345] Piock WF et al. Future gasoline engine concepts based on direct injection technology. Proceedings of the 1998 JSAE Spring Convention, No. 984, Paper No. 9831009, 1998. p. 27–30. [346] Plapp G et al. The role of future engine control systems for gasoline engines fuel economy improvement. International Symposium on Powertrain Technologies for a 3-Litre-Car, 1996. p. 57–66. [347] Pontoppidan M, Gaviani G, Marelli M, Bella G, Rocco V. Improvements of GDI-injector optimization tools for enhanced SI-engine combustion chamber layout. SAE Technical Paper, No. 980494, 1998. [348] Risi AD et al. A study of H 2,CH 4,C 2H 6 mixing and combustion in a direct-injection stratified-charge engine. SAE Technical Paper, No. 971710, 1997. [349] Robeck CM et al. Simulation of stratified charge combustion. SAE Technical Paper, No. 981454, 1998. [350] Sandquist H et al. Influence of fuel volatility on emissions and combustion in a direct injection spark ignition engine. SAE Technical Paper, No. 982701, 1998.
Page 1 and 2:
PERGAMON Automotive spark-ignited d
Page 3 and 4:
F. Zhao et al. / Progress in Energy
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 16 and 17:
452 and investigated. A schematic r
Page 18 and 19:
454 F. Zhao et al. / Progress in En
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
470 3. Combustion chamber geometry
Page 36 and 37:
472 In general, a rotating flow str
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
494 ◦ reduced valve size; ◦ pos
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75: 510 F. Zhao et al. / Progress in En
Page 80 and 81: 516 was achieved for the unthrottle
Page 96 and 97: 532 because both the exhaust flow a
Page 100 and 101: 536 Many new mixture-preparation an
Page 108 and 109: 544 valve, with some of the fuel be
Page 110 and 111: 546 A motor/generator is attached t
Page 112 and 113: 548 • vertical, near-centrally mo
Page 114 and 115: 550 pre-chamber and the combustion
Page 116 and 117: 552 6.17. Orbital combustion system
Page 126: 562 F. Zhao et al. / Progress in En
show all

Automotive spark-ignited direct-injection gasoline engines

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?