Logic Pro 9 User Manual - Help Library - Apple

Copying Voices or Staffs into Other Staff Styles
You can copy one (or several) voices and staffs, inclusive of their parameters, into other
staff styles.
To copy a voice or staff into another staff style
1 Select the voices or staffs you want to copy, by dragging vertically in the margin column
to the left of the staff numbers.
The selection is indicated by a dark gray vertical beam.
2 Choose Edit > Copy (or use the corresponding key command, default
assignment: Command-C).
3 Switch to the target staff style that you want to paste these voices into. (This also works
between different projects.)
4 Set the insert mark, then choose Edit > Paste (or use the corresponding key command,
default assignment: Command-V).
Note: If a voice is selected in the destination staff style (indicated by a black beam in the
left column), it is replaced by the pasted voices.
Copying Staff Styles Between Projects
At some point, you’ll probably want to use staff styles that already exist in another project.
To import all staff styles from another project
1 Do one of the following:
• Choose File > Project Settings > Import Project Settings (or use the corresponding key
command).
• Click the Settings button in the Arrange toolbar, then choose Import Settings.
• Click the Browser tab in the Media area.
2 Navigate to and select the appropriate project file.
3 Click the Import button.
Note: If accessing the settings from the Browser tab, you also need to click the Import
Settings button, which appears after you click the Import button.
4 In the Import Settings window, select the Staff Styles checkbox (and deselect all other
settings that you don’t want to import).
Chapter 31 Working with Notation
971