Logic Pro 9 User Manual - Help Library - Apple

Full Name
Click any line in this column to open an entry field that contains the default “@(reference).”
If you don’t change this, the name of the track’s instrument is used as the name for the
instrument in the score. As the track’s instrument name is often identical to the
corresponding synthesizer patch (Solo Strings High, for example), you’ll probably want
to assign another name here. This name is automatically displayed in the score as the full
name: “Violin 1,” for example. Display parameters for instrument names are set in the
Numbers & Names pane of the Score project settings. (See Numbers & Names Settings.)
Short Name
You can also define an abbreviated name for each instrument, which is used if Short
Names is chosen in the 1st Staff and Other Staffs pop-up menus of the Numbers & Names
pane, in the Score project settings.
Brackets and Bar Lines
You can define which staffs in the score set are connected by brackets or bar lines (either
at the beginning of each staff, or throughout), in the last four columns. Any of these
connections can be set by dragging vertically in the column, until you see the appropriate
display.
Chapter 31 Working with Notation
987