Type III C lass A Program

filled. To retry the command. reposition the tape with a
TAPE REWIND and the necessary number of TAPE SKIP commands.
If the error recurs, notify the operator.
E(00003) DISK ERROR WHILE WRITING.
An I/O error occu·rred during transfer of the file to or from
the disk utility file l , or the us.er's disk is full. Retry
the command. If the error recurs, notify the operator. If
the filemode was delete-while-reading, see note 2 under
COMBINE,. Note b.
E(00004) FATAL TAPE ERROR WHILE READING.
An I/O error occurred. A tapemark may not be at the end of
the tape. Reposition the tape and retry the command. If the
error recurs" and the file has not been loaded, part of the
file may be recoverable under the designation (DISK) (TEMP).
See E(00006).
E(OOOOS) TAPE IS NOT IN -TAPE LOAD- FORMAT.
A tape record was read which was not written by TAPE DUMP .•
The wrong tape is mounted, or reading has continued past the
end of TAPE DUMP output because no tapemark was read.
E(00006) ENDING RECORD OF FILE MISSING.
A tapemark or end of reel was encountered before the flagged
directory record of the current file. Part of the file may
be recoverable under the designation (DISK) (TFlLE) P3.
Note that the mode is delete-after-reading, so an ALTER or
COMBINE command must be issued before inspecting this file.
398 TAPE