ICR 803 Bar Code Scanner BAR CODE MANUAL

More documents

Recommendations

Info

U.S. Currency U.S. Currency On allows you to scan characters in the font used on U.S. currency. The default setting allows you to scan any 8 digit combination. If you have created an OCR template, character combinations that fit the template can be scanned. MICR E13 B MICR E13 B On allows you to scan MICR characters on a bank check. The default setting allows you to scan any 8 digit combination. If you have created an OCR template, character combinations that fit the template can be scanned. SEMI Font SEMI Font On allows you to scan the SEMI font used in the semiconductor industry. All OCR Off turns off all OCR capability in the imager, so the imager will be able to scan linear, stacked, matrix, and composite bar codes, but not OCR fonts. However, any OCR templates you have created will be retained in memory. - 80 -
Creating OCR Templates You can create a custom “template,” or character string that defines the length and content of OCR strings that will be read with your imager. There are several choices when creating a custom template for your application. You can create a template for a single format, you can string together several formats, and you can create a template for a user-defined variable. These choices are described in detail below. Creating an OCR Template A single template allows you to program the imager to read any combination of characters in the order you specify. Refer to examples that follow the Template Characters table below. Template Characters a represents any alphanumeric character (digit or letter) c represents a check character position d represents any digit e represents any available OCR character g represents character from user-defined variable “g” h represents character from user-defined variable “h” l represents any uppercase letter t marks the start of a new template r multi row indicator All other characters represent themselves. Spaces can be used. To Add an OCR Template 1. Begin building the template. Scan the Enter OCR Template symbol. 2. Scan the characters for the string. Use the Template Characters chart above to determine what characters you need to create your format. Use the OCR Programming Chart (after the Sample Codes in Appendix D) to scan the characters for your template. Example A: You need to read any combination of 8 digits. The template would be: dddddddd To create this template, you would scan the Enter OCR Template symbol, then scan the d from the OCR Programming Chart after the Sample Codes (in Appendix D) 8 times. Scan Save OCR Template. This would let you read any string of 8 digits, for example: 37680981 3. Character Match Sequences On the ASCII Conversion Chart (Appendix B), find the Hex value that represents the character(s) you want to match. Use the Programming Chart (Appendix D) to scan the numbers that represent these characters. Example B: You need to read 3 digits, 3 specific characters (ABC), 3 digits. The template would be: ddd414243ddd - 81 -
Page 1 and 2:
ICR 803 Bar Code Scanner BAR CODE M
Page 3 and 4:
USB COM Port Emulation Scan the fol
Page 5 and 6:
ICR803 Bar Code Manual - Rev A - 04
Page 7 and 8:
Good Read Indicators ICR803 Bar Cod
Page 9 and 10:
Reread Delay This sets the minimum
Page 11 and 12:
Manual Trigger, Low Power The image
Page 13 and 14:
LED Power Level This selection allo
Page 15 and 16:
Centering Use Centering to narrow t
Page 17 and 18:
Decode Search Mode There are three
Page 19 and 20:
Output Sequence Example In this exa
Page 21 and 22:
Multiple Symbols No Read Note: This
Page 23 and 24:
- 23 -
Page 25 and 26:
To add a backslash (\), scan 5, C,
Page 27 and 28:
Intercharacter, Interfunction, and
Page 29 and 30: Data Formatting Data Format Editor
Page 31 and 32: count of the number of suppressed c
Page 33 and 34: Symbologies This programming sectio
Page 35 and 36: - 35 -
Page 37 and 38: Codabar Message Length Scan the bar
Page 39 and 40: Code 39 Message Length Scan the bar
Page 41 and 42: FULL ASCII Full ASCII Code 39 decod
Page 43 and 44: Interleaved 2 of 5 Message Length S
Page 45 and 46: Code 2 of 5 Code 2 of 5 Message Len
Page 47 and 48: Matrix 2 of 5 Matrix 2 of 5 Message
Page 49 and 50: Code 128 ISBT 128 Concatenation In
Page 51 and 52: Telepen Telepen Output Using AIM Te
Page 53 and 54: UPC-A Addenda This selection adds 2
Page 55 and 56: UPC-E0 Addenda Required When Addend
Page 57 and 58: - 57 -
Page 59 and 60: - 59 -
Page 61 and 62: - 61 -
Page 63 and 64: - 63 -
Page 65 and 66: Code 49 Message Length Scan the bar
Page 67 and 68: MicroPDF417 - 67 -
Page 69 and 70: EAN•UCC Emulation The imager can
Page 71 and 72: - 71 -
Page 73 and 74: Korea Post Korea Post Message Lengt
Page 75 and 76: Data Matrix Data Matrix Message Len
Page 77 and 78: Aztec Code Aztec Code Message Lengt
Page 79: OCR Default All OCR Settings turns
Page 83 and 84: 9902XZ50 You can string together as
Page 85 and 86: OCR Modulo 36 Character Set Scan th
Page 87 and 88: Test Menu When you scan the Test Me
Page 89 and 90: Plessey Code ]P0 n (0x6E) PosiCode
Page 91 and 92: APPENDIX C - Sample Symbols - 91 -
Page 93 and 94: APPENDIX D - Programming Charts - 9
Page 95 and 96: APPENDIX D - Programming Charts - 9
show all

ICR 803 Bar Code Scanner BAR CODE MANUAL

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?