CCNP TSHOOT 6.0 - The Cisco Learning Network
CCNP TSHOOT 6.0 - The Cisco Learning Network
CCNP TSHOOT 6.0 - The Cisco Learning Network
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CCNP</strong>v6 <strong>TSHOOT</strong><br />
Dec 11 14:28:15.542: DHCPD: using received relay info.<br />
Dec 11 14:28:17.556: DHCPD: Sending DHCPOFFER to client 0100.0bdb.04a5.cd (10.1.<br />
10.1).<br />
Dec 11 14:28:17.556: DHCPD: Check for IPe on Vlan10<br />
Dec 11 14:28:17.556: DHCPD: creating ARP entry (10.1.10.1, 000b.db04.a5cd).<br />
Dec 11 14:28:17.556: DHCPD: unicasting BOOTREPLY to client 000b.db04.a5cd (10.1.<br />
10.1).<br />
Dec 11 14:28:17.556: DHCPD: Reload workspace interface Vlan10 tableid 0.<br />
Dec 11 14:28:17.556: DHCPD: tableid for 10.1.10.252 on Vlan10 is 0<br />
Dec 11 14:28:17.556: DHCPD: client's VPN is .<br />
Dec 11 14:28:17.556: DHCPD: DHCPREQUEST received from client 0100.0bdb.04a5.cd.<br />
Dec 11 14:28:17.556: DHCPD: Sending DHCPACK to client 0100.0bdb.04a5.cd (10.1.10<br />
.1).<br />
Dec 11 14:28:17.556: DHCPD: Check for IPe on Vlan10<br />
Dec 11 14:28:17.556: DHCPD: creating ARP entry (10.1.10.1, 000b.db04.a5cd).<br />
Dec 11 14:28:17.556: DHCPD: unicasting BOOTREPLY to client 000b.db04.a5cd (10.1.<br />
10.1).<br />
In the above example, with the ip dhcp relay information trust-all command issued on DLS1, the<br />
entire DHCP conversation between PC-B and the DLS1 server takes place, and PC-B is provided with an IP<br />
address.<br />
EIGRP Authentication-related Commands<br />
DLS2#show ip eigrp neighbors<br />
EIGRP-IPv4:(1) neighbors for process 1<br />
H Address Interface Hold Uptime SRTT RTO Q Seq<br />
(sec) (ms) Cnt Num<br />
1 10.1.2.14 Fa0/5 13 00:20:59 1 200 0 29<br />
0 10.1.200.252 Vl200 14 05:31:25 2 200 0 45<br />
In the above example, DLS2 has two EIGRP neighbors, R3 (10.1.2.14) via Fa0/5 and DLS1 (10.1.200.252) via<br />
VLAN 200.<br />
DLS2#show ip eigrp interfaces<br />
EIGRP-IPv4:(1) interfaces for process 1<br />
Xmit Queue Mean Pacing Time Multicast Pending<br />
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes<br />
Vl200 1 0/0 2 0/1 50 0<br />
Fa0/5 1 0/0 1 0/1 50 0<br />
In the above example, DLS2 has two interfaces participating in the EIGRP process, VLAN 200 and Fa0/5. Both<br />
interfaces have a peer attached.<br />
DLS2#show ip eigrp interfaces detail<br />
EIGRP-IPv4:(1) interfaces for process 1<br />
Xmit Queue Mean Pacing Time Multicast Pending<br />
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes<br />
Vl200 1 0/0 1 0/1 50 0<br />
Hello interval is 5 sec<br />
Next xmit serial <br />
Un/reliable mcasts: 0/18 Un/reliable ucasts: 22/9<br />
Mcast exceptions: 1 CR packets: 1 ACKs suppressed: 1<br />
All contents are Copyright © 1992–2010 <strong>Cisco</strong> Systems, Inc. All rights reserved. This document is <strong>Cisco</strong> Public Information. Page 13 of 17
Change language