YAMAHA Owner's Manual - ManageMyLife
YAMAHA Owner's Manual - ManageMyLife
YAMAHA Owner's Manual - ManageMyLife
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
_'_ _ _ _D '; _ ¸'¸ e_'_s':_Q_ _¸<br />
The EXTRA SP jacks can connect to the following speakers.<br />
• Presence L/R speakers<br />
• Zone2 speakers<br />
2<br />
Red: positive (+)<br />
Black: negative (-)<br />
Press down the tab and insert the bare end of the<br />
speaker cable into the hole in the terminal.<br />
Release the tab to secure the wire.<br />
Connect the subwoofer input jack to the<br />
SUBWOOFER 1 or 2 jack on this unit with an audio<br />
pin cable.<br />
Set the subwoofer volume as follows.<br />
Volume: Set to approximately halt volume (or slightly less than<br />
half).<br />
Crossover fiequency (if available): Set to maximum.<br />
NOTE<br />
Subwoofer examples<br />
After connection, applying this setting to this unit is required to<br />
activate all speaker connections. With using "Power Amp<br />
Assign" function, you can easily apply the speaker<br />
configuration.<br />
Refer to "Power Amp Assign" (_) for details on using<br />
"Power Amp Assign" function.<br />
En 20