Trouble Godes - diagramas.diagram...

I Engine management
Under steering column
General information
Refer to the front of this manual for general test conditions,
terminology, detailed descriptions of wiring faults and a
general trouble shooter for electrical and mechanical faults.
Accessing and erasing
The engine control module (ECM) fault memory can only be
accessed and erased using diagnostic equipment
connected to the data link connector (DLC).
Trouble code identification
EOBD
type
Model: 9-3 2,O Turbo 9-3 2,3 Viggen 9-5 2,0/2,3 Turbo
9-5 2,3 AeroI3,O
Year: 1997-04
Engine code: B204E, B204L, B204R, B205E, B205F, B205L,
B205R, B235E, B235R, B308E,
System: Trionic T7 Trionic T5
Fautt location Probable cause
PO
PI105
I Refer to EOBD trouble code table I -
Manifold absolute pressure (MAP) sensor, TC system - Intake leak, hose(s)
leak detected 1
PI106 Manifold absolute pressure (MAP) sensor, TC system - MAP sensor - TC system
rangelperformance problem
PI107
PI108
PI110
Manifold absolute pressure (MAP) sensor, TC system -
open circuiffshort to earth
Manifold absolute pressure (MAP) sensor, TC system -
short to positive
Turbocharger (TC) bypass valve - rangelperformance
problem
Wiring open circuiffshort to earth, ECM
Wiring short to positive, ECM
PI131 I Heated oxygen sensor (H02S) 1, bank 1 - malfunction I Wiring, H02S, ECM
I I
PI132 I Heated oxygen sensor (H02S) 1, bank 1 - malfunction 1 Wiring, H02S, ECM
Hose(s), TC bypass solenoid, TC bypass valve