Untitled

1
To program the 3060/3080, you must scan a series of
programming bar codes in the correct order. Descriptions of
each programming option are shown on the left hand
Description pages. The programming options and
programming bar codes are listed on the right hand
Programming pages.
Fold out the back cover of this manual. You will see a table of
alphanumeric bar codes which are used to program the various
options presented. To program the 3060/3080 scanner, move
from left to right, across the Description and Programming
pages, then to the fold out back cover to program the option
codes.
To exit the programming mode, move back to the Programming
page and scan the Exit Programming bar code.
This programming sequence is diagrammed on the following
page.
Description Page Programming Page Fold Out Back Cover