Untitled

3
Module Time: This selection programs the time of the minimum bar. Increase the module time if the 3060/3080 is not receiving data
correctly.
Narrow/Wide Ratio: This selection programs the time ratio of narrow bars to wide bars. Increase the module time if the 3060/3080
is not receiving data correctly.
Code 39 Emulation: Some decoders are programmed to accept only standard Code 39 characters. The scanner may be
programmed to skip or replace non-standard Code 39 characters.
Disable: Characters are transmitted without change.
Code 39 Translate or Skip: All standard characters are transmitted as Code 39. Lower case characters are
translated to upper case Code 39. Any other characters are skipped.
Code 39 Translate or Send Space: All standard characters are transmitted as Code 39. Lower case characters are
translated to upper case Code 39. Any other characters are transmitted as a space.