Service Manual, Micropaq Monitor - Welch Allyn

More documents

Recommendations

Info

8 Overview Welch Allyn Micropaq Monitor Connectors, indicators and controls Snapshot Key Battery SpO2 Connector ECG Connector Visual Alarm Indicator Liquid Crystal Display Select Key and Silence Patient Alarm/ Equipment Alert Key Scroll Up Key and Reset Patient Alarm Tone Key Scroll Down Key and Main Menu Key Battery pack latch SpO 2 connector clip (model 408) or cover (model 406) Back
Service Manual Overview 9 Indicators Visual Alarm indicator Audible Alarm indicator Controls Snapshot key Green Flashes slowly during normal operation. Red Flashes during patient alarm. Remains on continuously when alarms are silenced or suspended. Yellow Flashes during an equipment alert and while the monitor is not connected to the network. Remains on continuously if the operator suspends an alert at Acuity for 90 seconds or acknowledges (dismisses) a low battery alert from the monitor or Acuity. Note Flashing green indicates that the monitor is connected to the network but not necessarily connected to a patient. If the monitor is actively monitoring a patient, continuous green indicates that no alarms or alerts are detected. Beeps to indicate a patient alarm, and beeps faster for life-threatening arrhythmia alarms. Beeps when the equipment needs attention. This beep tone is slower than the patient alarm tones. Volume can be configured at Acuity as high, low, or off. Volume can be configured at Acuity for network connection or for when communications with the FlexNet network are interrupted. When connected to Acuity, pressing this key sends a snapshot of the patient’s numeric and waveform data to the Acuity Central Monitoring System. Depending on how Acuity is configured, this will cause Acuity to print a 21-second snapshot (14 seconds of history, 7 seconds of data after the button is pressed) to the Acuity central station printer. Note Snapshot is the default selection of the monitor. However, the connected monitor will inherit the configuration previously defined by Acuity. For example, if Acuity has defined the Snapshot key to respond with a Nurse Call function and a new monitor is introduced to the system, the Snapshot key definition will remain as Nurse Call. For more information about using the Acuity Central Monitoring System, refer to Acuity Directions For Use (810-1605-XX) Scroll up and reset Patient Alarm Tone key Scrolls up menus on the display. Resets a silenced patient alarm tone.
Page 1 and 2: Micropaq ® Monitor Service Manual
Page 3 and 4: Contents 1 - Safety summary . . . .
Page 5 and 6: 1 Safety summary All users of the m
Page 7 and 8: Service Manual Safety summary 3 Sym
Page 9 and 10: 2 Overview Purpose and scope This d
Page 11: Service Manual Overview 7 Product c
Page 15 and 16: 3 Visual check Functional verificat
Page 17 and 18: Service Manual Functional verificat
Page 31 and 32: 4 Troubleshooting Troubleshooting c
Page 33 and 34: Service Manual Troubleshooting 29 R
Page 35 and 36: 5 Introduction Repair procedures Th
Page 37 and 38: Service Manual Repair procedures 33
Page 63 and 64:
Service Manual Repair procedures 59
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
6 Feature summary Technical overvie
Page 81 and 82:
7 Field Replaceable Units This list
Page 83 and 84:
A Micropaq exploded view ID label R
show all

Service Manual, Micropaq Monitor - Welch Allyn

Create successful ePaper yourself

Delete template?

Save as template?