Service Manual, Micropaq Monitor - Welch Allyn
Service Manual, Micropaq Monitor - Welch Allyn
Service Manual, Micropaq Monitor - Welch Allyn
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
36 Repair procedures <strong>Welch</strong> <strong>Allyn</strong> <strong>Micropaq</strong> <strong>Monitor</strong><br />
2. Remove the screws and nylon shoulder washers at the locations shown below.<br />
Note Do not damage the SpO 2 foil shield when removing the nylon shoulder washers.<br />
Note The Masimo version has two screws with nylon shoulder washers. The Nellcor<br />
version has only one screw with a nylon shoulder washer, as shown below.<br />
3. Unfold the SpO 2 shield.<br />
Screw with nylon shoulder washer (Masimo only)<br />
Screw with nylon shoulder washer (Masimo and Nellcor)<br />
4. For Masimo models, continue with the next section. For Nellcor models, continue<br />
with “Disconnecting the SpO 2 board (Nellcor models)” on page 37.<br />
Disconnecting the SpO 2 board (Masimo models)<br />
1. Slide the SpO 2 board out from under the two bracket hooks.<br />
Bracket hook<br />
Bracket hook