Service Manual, Micropaq Monitor - Welch Allyn
Service Manual, Micropaq Monitor - Welch Allyn
Service Manual, Micropaq Monitor - Welch Allyn
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 Overview <strong>Welch</strong> <strong>Allyn</strong> <strong>Micropaq</strong> <strong>Monitor</strong><br />
Battery<br />
Scroll Down and Main menu key<br />
Scrolls down menus on the display.<br />
Displays the Main menu.<br />
Select and Silence Patient Alarm/Equipment Alert key<br />
<strong>Service</strong> menu<br />
Maintenance<br />
Selects the choice highlighted on the menu.<br />
During patient alarms, silences the tone at the monitor and Acuity (if connected) for<br />
90 seconds. During equipment alerts, silences or acknowledges (dismisses) the alert<br />
at the monitor and at Acuity.<br />
Insert the battery to turn on power. Remove the battery to turn off power. (While the<br />
battery is removed, no monitoring occurs.)<br />
Recharge the battery while it is removed from the monitor.<br />
To order a new battery, contact <strong>Welch</strong> <strong>Allyn</strong> (see page ii).<br />
Refer to “Functional verification” on page 11 for service menus and test screens.<br />
For monitor maintenance information, refer to “Operator Maintenance” in <strong>Micropaq</strong><br />
Directions for Use. Covered topics include the following:<br />
Inspecting and cleaning the monitor and accessories<br />
Charging or replacing the battery
Change language