Catalog ST PCS 7.1 - September 2005

■ Overview
Fuzzy-Control++ is a Siemens configuration tool for fuzzy logic.
It offers solutions for non-linear controllers and for predicting behavior
of complex mathematical procedures from the process
automation which are difficult or impossible to implement using
standard tools.
Fuzzy-Control++ enables fuzzy systems to be developed and
configured effectively for the automation of technical processes.
Empirical process knowledge and verbally described experience
can be implemented directly in open and closed loop controls,
pattern recognition, decision logic etc.
■ Application
Typical applications for fuzzy logic are:
• Open and closed-loop control
• Parameter adaptation of controllers
• Fault compensation and precontrol
• Pattern recognition, process data evaluation and diagnosis
• Automation of manual process interventions of a plant operator
• Process control with coordination of subordinate open and
closed loop controllers
Examples include pressure, temperature and levels, as well as
control of speed and intervals. In early warning and diagnostic
systems, fuzzy logic is used for the early detection of hazardous
states and for the implementation of decision-making logic.
■ Function
The Fuzzy-Control++ configuration tool supports the user when
creating a fuzzy system. The application of this system requires
only basic knowledge about such systems, as no mathematical
or control settings have to be made. The user is supported during
the configuration process by extensive online help.
The configuration tool package comprises:
• a configuration tool (running under the Windows 2000 and
Windows XP operating systems),
• the runtime software for SIMATIC PCS 7 (function block for
CFC and OS faceplate ).
With the configuration tool, the fuzzy systems are configured and
generated. In continuous operation, the runtime software then
processes the systems that are found in a data block in the case
of SIMATIC PCS 7.
Advanced Process Control
■ Selection and Ordering Data Order No.
Fuzzy-Control++ D+E Basic
License V5.0
Configuration tool running under
Windows 2000 and XP, MPI-driver,
S7-blocks for one application,
manual, German and English
Fuzzy-Control++ V5.0 communications
package
for loading the blocks and online
monitoring via the PCS 7 plant
bus Industrial Ethernet
Fuzzy-Control++ V5.0 CFC
package
with blocks and faceplate for
PCS 7 V5 and V6
Fuzzy-Control++ S7 and CFC
copying license for further data
blocks
Fuzzy control++:
Configuration tool for fuzzy logic
C) Subject to export regulations AL: N, ECCN: EAR99S
■ More information
Siemens AG
Industrial Solutions & Services
Phone: +49 91 31 7-461 11
Fax: +49 91 31 7-447 57
E-mail: it4industry@siemens.com
Additional information is available in the Internet under:
http://www.siemens.com/fuzzycontrol
Order no. Price
2XV9 450-1WC10-0AA0 C)
2XV9 450-1WC10-0DA0 C)
2XV9 450-1WC10-0EA0 C)
2XV9 450-1WC11-4XA0 C)
Siemens ST PCS 7.1 · September 2005
3/7
3