Catalog ST PCS 7.1 - September 2005

More documents

Recommendations

Info

7 Distributed I/O on the PROFIBUS Function blocks for SIWAREX weighing modules ■ Overview Level, proportioning and belt scales in process engineering applications can be quickly and efficiently configured using preconfigured weighing blocks. For the SIMATIC PCS 7 process control system, Siemens offers configuration packages with function blocks for the SIWAREX U, SIWAREX M, SIWAREX FTA and SIWAREX FTC weighing modules. These weighing blocks are suitable for both standard and fault-tolerant automation systems. In the case of fault-tolerant automation systems, access to the single SIWAREX U/M/FTA/FTC weighing modules can be made via both subsystems. The weighing blocks supplied with faceplate allow not only the rational integration of the SIWAREX U/M/FTA/FTC weighing modules into the engineering system, but also the user-friendly operation of the scales by means of the SIMATIC PCS 7 operator stations. Integrated alarm behavior and maintenance functions such as the reading or writing of all scale parameters ensure short standstill times and help to increase the availability. The pixel-graphics engineering with the CFC editor is very clear and easy to use. The use of prepared blocks also eliminates possible sources of errors and reduces the configuration costs. 7/2 Siemens ST PCS 7.1 · September 2005 ■ Selection and Ordering Data Order No SIWAREX M configuration package consisting of: Function block, faceplate, parameterizing software and manual on CD-ROM, 2 languages (German, English), engineering license for SIWAREX M • For SIMATIC PCS 7 V5.2 7MH4 583-3EA63 • For SIMATIC PCS 7 V6.0 and 7MH4 583-3EA64 V6.1 SIWAREX U configuration package consisting of: Function block, faceplate, parameterizing software and manual on CD-ROM, 2-languages (German, English), engineering license for SIWAREX U • For SIMATIC PCS 7 V5.2 7MH4 683-3BA63 • For SIMATIC PCS 7 V6.0 and 7MH4 683-3BA64 V6.1 SIWAREX FTA configuration 7MH4 900-2AK61 pakkage for SIMATIC PCS 7 V6.0 and V6.1 consisting of: Function block, faceplate, parameterizing software and manual on CD-ROM, 2 languages (German, English), engineering license for SIWAREX FTA SIWAREX FTC configuration 7MH4 900-3AK61 pakkage for SIMATIC PCS 7 V6.0 and V6.1 consisting of: Function block, faceplate, parameterizing software and manual on CD-ROM, 2 languages (German, English), engineering license for SIWAREX FTC ■ More information Siemens AG A&D PI 14 Phone: +49 721 595-2811 Fax: +49 721 595-2901 E-mail: siwarex.hotline@khe.siemens.de Additional information is available in the Internet under: http://www.siemens.com/siwarex
■ Overview Drive ES PCS 7 enables Siemens drives to be controlled via SI- MATIC PCS 7 and operated and monitored in the operator station. The faceplates make all the relevant data for plant operation available on the operator station. Drive ES PCS 7 for SIMATIC PCS 7 V6.1 additionally provides all drive data relevant to the PCS 7 Asset Management for display on the maintenance station. For parameter settings, commissioning and detailed diagnostics of the drive, it is recommended that you also use Drive ES Basic on the engineering station. Distributed I/O on the PROFIBUS Drive ES: Function blocks for drives ■ Application Drive ES PCS 7 can integrate the following drive series into SIMATIC PCS 7: • SIMOVERT MASTERDRIVES VC and MC • MICROMASTER 3rd and 4th generation • SIMOREG DC Master • SINAMICS S120/150 and G130/150 MASTERDRIVES The MASTERDRIVES series of converters is integrated and modular. The power range extends from 0.55 to 2300 kW. All standard international line voltages from 200 to 690 V are covered. Four different versions are available, depending on the application and required performance: Compact Plus, compact device, rack-mounting unit and cabinet unit. MASTERDRIVES converters are also suitable for demanding technological and dynamic applications. MICROMASTER MICROMASTER converters are standard frequency converters in the power range from 0.12 to 250 kW and can be used in numerous variable-speed drive applications. They are especially suitable for applications with pumps, fans and in conveyor systems. Their large range of line voltages enables them to be used all over the world. SIMOREG DC Master The SIMOREG DC Master is a converter series for controlling DC motors designed for a power range from 6.3 to 2000 kW and voltages from 400 to 830 V. They are very dynamic and can therefore also be used for demanding technical applications. SINAMICS SINAMICS is the new family of drives from Siemens for innovative and future-oriented drive solutions in a wide power range from 0.12 to 1200 kW with line voltages from 380 to 690 V. Characteristic of the devices from the SINAMICS family which are based on a shared platform concept is their integrated functionality, high degree of flexibility, and facility for combination. SINAMICS S The SINAMICS S120 drive system is a modular system for highperformance applications in industrial machine construction and plant engineering. A wide range of matched designs, components and functions always allow an optimum solution to be found. SINAMICS S120 can be used to implement powerful single drives and coordinated drives (multi-axis applications) with vector or servo functionality. SINAMICS G150 are designed as cabinet units for variablespeed drives in machine construction and plant engineering. They are particularly suitable for variable-speed drives with high requirements placed on dynamic response and speed accuracy, frequent braking cycles with high braking energies, and four-quadrant operation. SINAMICS G The AC converters of the SINAMICS G130 series (rack-mountable) and SINAMICS G150 series (cabinet devices) are specialists for all applications where solid, liquid or gaseous materials have to be moved, transported, pumped or compressed through the use of pumps, fans and compressors with a power range from 75 to 800 kW. These are specially tailored to the requirements of drives with quadratic and constant load characteristics without regeneration. Siemens ST PCS 7.1 · September 2005 7/3 7
Page 1 and 2: simatic PCS 7 Add-ons for the SIMAT
Page 3 and 4: SIMATIC Add-ons for the SIMATIC PCS
Page 5 and 6: Siemens ST PCS 7.1 · September 200
Page 7 and 8: SENTRON Circuit Breakers SIMOCODE p
Page 9 and 10: Maintenance Substation Distribution
Page 11 and 12: Information and Management Systems
Page 13 and 14: ■ Overview Information and Manage
Page 15 and 16: Advanced Process Control 3/2 INCA:
Page 17 and 18: ■ Overview Advanced Process Contr
Page 19 and 20: ■ Overview In practice, conventio
Page 21 and 22: ■ Overview Fuzzy-Control++ is a S
Page 23 and 24: Industry-specific software 4/2 CEMA
Page 25 and 26: ■ Selection and Ordering Data Ord
Page 27 and 28: Operator control and monitoring 5/2
Page 29 and 30: ■ Overview Digital video monitori
Page 31 and 32: ■ Overview Any analog cameras ISD
Page 33 and 34: ■ Overview The full specification
Page 35 and 36: Operator control and monitoring iPC
Page 37 and 38: ■ Overview SERVER ROOM LOCAL ADMI
Page 39 and 40: Operator control and monitoring PCS
Page 41 and 42: Libraries/blocks/tools 6/2 MFL: Mod
Page 43 and 44: ■ Overview One outstanding featur
Page 45 and 46: ■ Overview The Standard Chemical
Page 47 and 48: ■ Overview The PCS 7 Scheduler pe
Page 49: Distributed I/O on the PROFIBUS 7/2
Page 53 and 54: ■ Overview Distributed I/O on the
Page 55 and 56: ■ Technical specifications AddFEM
Page 57 and 58: ■ Overview The Ex Hubs, often ref
Page 59 and 60: Simulation 8/2 Introduction 8/3 SIM
Page 61 and 62: ■ Overview The system for field b
Page 63 and 64: ■ Overview SIMIT is a powerful si
Page 67 and 68: Diagnostics 9/2 BANY: Bus analysis
Page 69 and 70: BANY PROFIBUS The bus diagnosis sup
Page 71 and 72: ■ Overview The operator in the co
Page 73 and 74: ■ Overview Whereas process contro
Page 75 and 76: Cabinet construction 10/2 Cabinet c
Page 79 and 80: ■ Options ■ More information Pr
Page 81 and 82: Clock time synchronization 11/2 SIC
Page 83 and 84: ■ Selection and Ordering Data Opt
Page 85 and 86: Migration 12/2 Gateway GT104CS: AS-
Page 87 and 88: Other 13/2 Siemens Fingerprint Mous
Page 89 and 90: Other PCS 7 Engineering Auditor ■
Page 91 and 92: Appendix 14/2 A&D Online Services 1
Page 93 and 94: .I In the face of harsh competition
Page 95 and 96: ■ Siemens Automation Solution Pro
Page 97 and 98: ■ 4 4-quadrants .................
Page 99 and 100: ■ Appendix Siemens ST PCS 7.1 ·
Page 101 and 102:
■ Appendix Siemens ST PCS 7.1 ·
Page 103 and 104:
Automation and Drives Catalog Inter
show all

Catalog ST PCS 7.1 - September 2005

Create successful ePaper yourself

Delete template?

Save as template?