Catalog ST PCS 7.1 - September 2005

More documents

Recommendations

Info

0 Cabinet construction Cabinet construction for SIMATIC PCS 7 ■ Selection and Ordering Data Order No. ET 200M peripheral device 6DL2802- PROFIBUS • PROFIBUS DP in copper, for IM 153-1 and IM 153-2 1 • PROFIBUS DP in copper, for redundant IM 153-2 2 • PROFIBUS DP in FIBER OPTIC, for IM 153-1 and IM 153-2 3 • PROFIBUS DP in fiber optic, for redundant IM 153-2 4 ET-line • ET-line for non-redundant IM 153 without individual fusing of the I/O modules, with only one circuit-breaker for IM 153 and load power supply, or one circuitbreaker for IM 153 and one circuit breaker for load power supply (circuit-breakers must be ordered together with cabinet 6DL2800... ) • ET-line for redundant IM 153 without individual fusing of the I/O modules, with one circuit-breaker for first IM 153, with one circuit-breaker for second IM 153 and one circuit-breaker for load power supply (circuitbreakers must be ordered together with cabinet 6DL2800... ) • ET-line for redundant IM 153 without individual fusing of the I/O modules, with one circuit-breaker for first IM 153, with one circuit-breaker for second IM 153. The load power supply is fed via a diode module from the circuit-breakers of the IM (circuit-breakers must be ordered together with cabinet 6DL2800...) • ET-line AC 230V for redundant IM 153 without individual fusing of the I/O modules, with one circuit-breaker for first PS 230 V, with one circuit-breaker for second PS 230 V. The load power supply is fed via a diode module from both PS’s (circuit-breakers must be ordered together with cabinet 6DL2800...) • ET-line for non-redundant IM 153 with individual fusing of the I/O modules, with only one circuit-breaker for IM 153 and load power supply, or one circuit-breaker for IM 153 and one circuit-breaker for load power supply (circuit-breakers must be ordered together with cabinet 6DL2800...) • ET-line for redundant IM 153 with individual fusing of the I/O modules, with one circuit-breaker for first IM 153, with one circuit-breaker for second IM 153 and one circuit-breaker for load power supply (circuitbreakers must be ordered together with cabinet 6DL2800... ) • ET-line for redundant IM 153 with individual fusing of the I/O modules, with one circuit-breaker for first IM 153, with one circuit-breaker for second IM 153. The load power supply is fed via a diode module from the circuit-breakers of the IM (circuit-breakers must be ordered together with cabinet 6DL2800...) • ET-line AC 230 V for redundant IM 153 with individual fusing of the I/O modules, with one circuit-breaker for first PS 230 V, with one circuit-breaker for second PS 230 V. The load power supply is fed via a diode module from both PS’s (circuit-breakers must be ordered together with cabinet 6DL2800...) 10/4 Siemens ST PCS 7.1 · September 2005 IM 7 7 7 7 7 A A B A C A D A A B B B C B D B
■ Options ■ More information Project-specific cabinets Siemens AG Apart from the standardized cabinets, we manufacture cabinets A&D SE S2 for specific projects or customer requirements: 76187 Karlsruhe, Germany • Cabinets or different sizes and designs, Tel.: +49 721 595-3776 • small wall-mounted housings for distributed construction or Fax: +49 721 595-4711 • outdoor units with air conditioning. All are offered with the option of Ex-zone versions and non-standard degrees of protection such as NEMA 4x or IP66. E-mail: addon_s2@siemens.com Cabinet construction Cabinet construction for SIMATIC PCS 7 ■ Selection and Ordering Data Order No. ET 200M peripheral device 6DL2802- 7 7 7 7 7 Installation of the I/O modules • without installation of the I/O modules 0 • without installation of the I/O modules, prepared with dividing segment and plate in cable duct for Ex(i) design 1 • Installation of 4 I/O modules, connect L+ and M- supply, test modules and set parameters 2 • Installation of 8 I/O modules, connect L+ and M- supply, test modules and set parameters 3 • Installation of 4 I/O modules for Ex(i), connect L+ and M- supply, test modules and set parameters, cable guide for L+ I/O-module supply, dividing segment between non-hazardous and hazardous areas, dividing plate in cable duct, cable duct marked in blue 4 • Installation of 8 I/O modules for Ex(i), connect L+ and M- supply, test modules and set parameters, cable guide for L+ I/O-module supply, dividing segment between non-hazardous and hazardous areas, dividing plate in cable duct, cable duct marked in blue Test 5 • without test I/O-functions 0 • Function test inputs/outputs for 4 modules 1 • Function test inputs/outputs for 8 modules DP/PA coupler 2 • Installation, wiring and bus connection of up to 4 DP/PA couplers on 19" DIN rails without individual fusing of the I/O modules Order DP-bus connectors separately according to number of couplers. 6DL2 803-1AA00 • Installation, wiring and bus connection of up to 4 DP/PA couplers on 19" DIN rails with individual fusing of the I/O modules Order DP-bus connectors separately according to number of couplers. DP/PA Link Installation, wiring and bus connection of IM 157 and up to 4 DP/PA couplers on 19" DIN rails without individual fusing of the I/O modules Order bus modules separately for hot swapping function. Installation, wiring and bus connection of IM 157 and up to 4 DP/PA couplers on 19" DIN rails with individual fusing of the I/O modules Order bus modules separately for hot swapping function. 6DL2 803-1AA10 6DL2 803-1BA00 6DL2 803-1BA10 Siemens ST PCS 7.1 · September 2005 10/5 10
Page 1 and 2:
simatic PCS 7 Add-ons for the SIMAT
Page 3 and 4:
SIMATIC Add-ons for the SIMATIC PCS
Page 5 and 6:
Siemens ST PCS 7.1 · September 200
Page 7 and 8:
SENTRON Circuit Breakers SIMOCODE p
Page 9 and 10:
Maintenance Substation Distribution
Page 11 and 12:
Information and Management Systems
Page 13 and 14:
■ Overview Information and Manage
Page 15 and 16:
Advanced Process Control 3/2 INCA:
Page 17 and 18:
■ Overview Advanced Process Contr
Page 19 and 20:
■ Overview In practice, conventio
Page 21 and 22:
■ Overview Fuzzy-Control++ is a S
Page 23 and 24:
Industry-specific software 4/2 CEMA
Page 25 and 26:
■ Selection and Ordering Data Ord
Page 27 and 28: Operator control and monitoring 5/2
Page 29 and 30: ■ Overview Digital video monitori
Page 31 and 32: ■ Overview Any analog cameras ISD
Page 33 and 34: ■ Overview The full specification
Page 35 and 36: Operator control and monitoring iPC
Page 37 and 38: ■ Overview SERVER ROOM LOCAL ADMI
Page 39 and 40: Operator control and monitoring PCS
Page 41 and 42: Libraries/blocks/tools 6/2 MFL: Mod
Page 43 and 44: ■ Overview One outstanding featur
Page 45 and 46: ■ Overview The Standard Chemical
Page 47 and 48: ■ Overview The PCS 7 Scheduler pe
Page 49 and 50: Distributed I/O on the PROFIBUS 7/2
Page 51 and 52: ■ Overview Drive ES PCS 7 enables
Page 53 and 54: ■ Overview Distributed I/O on the
Page 55 and 56: ■ Technical specifications AddFEM
Page 57 and 58: ■ Overview The Ex Hubs, often ref
Page 59 and 60: Simulation 8/2 Introduction 8/3 SIM
Page 61 and 62: ■ Overview The system for field b
Page 63 and 64: ■ Overview SIMIT is a powerful si
Page 65 and 66: ■ Selection and Ordering Data Ord
Page 67 and 68: Diagnostics 9/2 BANY: Bus analysis
Page 69 and 70: BANY PROFIBUS The bus diagnosis sup
Page 71 and 72: ■ Overview The operator in the co
Page 73 and 74: ■ Overview Whereas process contro
Page 75 and 76: Cabinet construction 10/2 Cabinet c
Page 77: ■ Selection and Ordering Data Ord
Page 81 and 82: Clock time synchronization 11/2 SIC
Page 83 and 84: ■ Selection and Ordering Data Opt
Page 85 and 86: Migration 12/2 Gateway GT104CS: AS-
Page 87 and 88: Other 13/2 Siemens Fingerprint Mous
Page 89 and 90: Other PCS 7 Engineering Auditor ■
Page 91 and 92: Appendix 14/2 A&D Online Services 1
Page 93 and 94: .I In the face of harsh competition
Page 95 and 96: ■ Siemens Automation Solution Pro
Page 97 and 98: ■ 4 4-quadrants .................
Page 99 and 100: ■ Appendix Siemens ST PCS 7.1 ·
Page 101 and 102: ■ Appendix Siemens ST PCS 7.1 ·
Page 103 and 104: Automation and Drives Catalog Inter
show all

Catalog ST PCS 7.1 - September 2005

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?