Catalog ST PCS 7.1 - September 2005

■ Overview
Distributed I/O on the PROFIBUS
PCS 7 SIMOCODE pro - function block library
for the motor management system
The optional measured value and statistics block allows you to
use numerous measurement and statistics information of the SI-
MOCODE pro motor management system in addition to the comprehensive
diagnostics information.
The library blocks support all SIMOCODE pro control functions:
• Overload (OVL)
• Direct starter, soft starter (DIR, SOFT)
• Reversing starter, soft starter with reversing starter (REV,
SOFT)
• Star-delta (STAR)
• Star-delta with direction reversal (REVS)
• Dahlander, pole changing switch (DAHL, POL)
• Dahlander, pole changing switch with direction reversal
(DAHL REV, POL REV)
• Valve, positioning slide (VALVE, POS)
• Circuit-breaker (CB)
■ Selection and Ordering Data Order No.
The PCS 7 SIMOCODE pro function block library can be used for PCS 7 SIMOCODE pro function 3UF7 982-0AA00-0 A)
easy integration of the SIMOCODE pro motor management sys- block library V6.0
tem into the SIMATIC PCS 7 V6.0/V6.1 process control system.
The library comprises:
for integration of the
SIMOCODE pro motor management
system into SIMATIC PCS 7
• All blocks required for the automation system (AS):
V6.0
- Driver blocks
Type of supply:
- Motor blocks
• CD-ROM with function block li-
- Measured value and statistics blocks
brary,
• The elements required for operation and monitoring (symbols
and faceplates) for the operator station (OS).
installation program and online
help, German/English
• Single license Runtime for one
It supports the CFC function "Generate module driver" which AS 41x automation system
permits system-compatible integration into the PCS 7 driver
concept and minimizes the configuration requirements. SIMO-
CODE pro can also be integrated into the asset management of
SIMATIC PCS 7 V6.1 using the library blocks. No additional con-
PCS 7 SIMOCODE pro function
block library V6.1
for integration of the
SIMOCODE pro motor manage-
3UF7 982-0AA02-0
figuration work is necessary.
ment system into SIMATIC PCS 7
V6.1
■ Application
Type of supply:
• CD-ROM with function block li-
The blocks of the PCS 7 SIMOCODE pro library integrate the
SIMOCODE pro motor management system into the SIMATIC
PCS 7 process control system V6.0 or V6.1 over the
PROFIBUS DP.
brary,
installation program and online
help, German/English
• Single license Runtime for one
AS 41x automation system
The SIMOCODE pro motor management system has been designed
for use in motor control centers (MCC) in the process industry
and for power plant engineering. It is frequently used in
the automation of processes where a plant standstill would be
extremely expensive. The detailed operating, servicing and di-
Runtime software for
PCS 7 SIMOCODE pro function
block library V6.0/V6.1
Single license Runtime for one
AS 41x automation system
3UF7 982-0AA01-0
agnostics data provided by SIMOCODE pro enable you to effi- Type of supply:
ciently prevent plant downtimes, and you are able to determine
and eliminate faults extremely rapidly.
• Single license Runtime without
software or documentation
A) Subject to export regulations AL: N, ECCN: EAR99
■ Function
The blocks of the PCS 7 SIMOCODE pro library work together ■ More information
with SIMOCODE pro devices on the PROFIBUS DP which are
operated either directly following a PROFIBUS DP master sys- Siemens AG
tem (standard automation systems) or following a Y-link (fault- A&D CD MM1
tolerant automation systems).
Phone: +49 911 895 5900
Signal processing and technological functions of the blocks are Fax: +49 911 895 5907
oriented on the SIMATIC PCS 7 standard libraries (driver blocks, E-mail: Technical-assistance@siemens.com
technological blocks) and are optimally tailored to the functions
of the motor management system.
Additional information is available in the Internet under:
Users who previously configured motor feeder circuits using
conventional technology by means of signal blocks and motor or
valve blocks can now easily switch to the PCS 7 SIMOCODE pro
function block library.
http://www.siemens.com/simocode/software
Siemens ST PCS 7.1 · September 2005
7/5
7