Catalog ST PCS 7.1 - September 2005

More documents

Recommendations

Info

8 Simulation SIMBApro FAT: Field bus simulation ■ Selection and Ordering Data Order No. SIMBApro PCI 1-channel for 1 PROFIBUS line with max. 125 PROFIBUS DP slaves • Cyclic data exchange • Diagnostics functions • Reloadable device functions, e.g. SIMOCODE, SIMOVERT, DANFOSS, ABB, CEAG, Pepperl & Fuchs • Simulation of the SIMATIC S7 / PCS 7 slaves (z.B. ET 200) with the specific SIMATIC functions • Simulation of DP/PA links and DP/PA couplers 2-channel for 2 PROFIBUS lines each with max. 125 PROFIBUS DP slaves • Cyclic data exchange • Diagnostic functions V1.0, V1.1 • Reloadable device functions, e.g. SIMOCODE, SIMOVERT, DANFOSS, ABB, CEAG, Pepperl & Fuchs • Simulation of the SIMATIC S7 / PCS 7 slaves (z.B. ET 200) with the specific SIMATIC functions • Simulation of the SIMATIC redundancy functions SIMBApro PCI 1-channel for 1 PROFIBUS line with max. 125 PROFIBUS PA slaves • Simulation on physical PROFI- BUS PA line • Simulation of the specific PROFIBUS PA profiles (actuators, sensors) Services for every aspect of simulation • Support and advice • Selection of simulation tools • Strategy for implementing the simulation • Creation of simulation solutions at fixed price E) Subject to export regulations AL: N, ECCN: 5D992B2 8/4 Siemens ST PCS 7.1 · September 2005 9AE4 100-1CC00 E) 9AE4 100-1CD00 E) 9AE4 100-1CE00 E) On request ■ More information Siemens AG I&S IS E&C MES Phone: +49 721 595-6380 Fax: +49 721 595-8438 E-mail: simba.solutions@siemens.com Additional information is available in the Internet under: http://www.siemens.com/SimbaPro
■ Overview SIMIT is a powerful simulation platform which is integrated into the SIMATIC PCS 7 engineering by means of open interfaces, but which remains open for functional expansions as a result of its modular design. You do not need to be a specialist to generate and apply simulations with SIMIT. It is merely necessary to use SIMIT’s graphic desktop – all mathematical and IT procedures of a simulation are carried out invisibly by SIMIT in the background. As a test platform for SIMATIC user software, SIMIT provides a high scope of performance: it can be used on the one hand to automatically configure signal tests, or also to simulate processes and complete plants of any complexity in real-time. SIMIT provides the appropriate simulation environment whether you are interested in a simple key-triggered PLC signal test, testing of the field level, physical simulation of the process response for a complete plant test, or for operator training. SIMIT is designed such that its functionality and scope can be specifically adapted to individual requirements. The basic system already provides powerful simulation functions. Hardware and software modules can be used to specifically expand the SIMIT functionalities. Simulation is supported by appropriate automated functions. For example, importing of the symbol table or a list of signal names generated using Excel is sufficient for automatic configuration of the signal links. The associated control and display elements are also generated automatically. Sample solutions created using the PCS 7 Import/Export Assistant (IEA) can be imported into SIMIT to generate equivalent simulation patterns. ■ Function A simulation model is produced with SIMIT simply by "plugging together" individual components. These components are selected from a library, positioned on a chart, connected together, and parameterized. Simulation SIMIT: Simulation-based engineering Engineering on the PC with SIMIT The SIMATIC user program generated in SIMATIC PCS 7 is loaded into the PLC simulation S7-PLCSIM, and receives the simulated I/O signals from SIMIT via the PLCSIM coupling. The interface is configured automatically in SIMIT by importing the symbol table from SIMATIC PCS 7. SIMIT can also generate the corresponding simulation environment automatically using the PCS 7 Import/Export Assistant (IEA). Simulation examples matched to example automation solutions are used for this. The complete interaction between automation and process (model) is completed by means of a process model. If the PCS 7 operator station (WinCC) is coupled to PLCSIM, the complete automation function from the sensor to the automation and visualization systems and back again to the actuator can already be tested on the PCS 7 engineering system in the technical office without the actual existence of the automation hardware. PCS 7 engineering PCS 7 HMI Signals Hardware configuration SIMIT Devices (IEA) Actuators & sensors Process User software Siemens ST PCS 7.1 · September 2005 8/5 8
Page 1 and 2:
simatic PCS 7 Add-ons for the SIMAT
Page 3 and 4:
SIMATIC Add-ons for the SIMATIC PCS
Page 5 and 6:
Siemens ST PCS 7.1 · September 200
Page 7 and 8:
SENTRON Circuit Breakers SIMOCODE p
Page 9 and 10:
Maintenance Substation Distribution
Page 11 and 12: Information and Management Systems
Page 13 and 14: ■ Overview Information and Manage
Page 15 and 16: Advanced Process Control 3/2 INCA:
Page 17 and 18: ■ Overview Advanced Process Contr
Page 19 and 20: ■ Overview In practice, conventio
Page 21 and 22: ■ Overview Fuzzy-Control++ is a S
Page 23 and 24: Industry-specific software 4/2 CEMA
Page 25 and 26: ■ Selection and Ordering Data Ord
Page 27 and 28: Operator control and monitoring 5/2
Page 29 and 30: ■ Overview Digital video monitori
Page 31 and 32: ■ Overview Any analog cameras ISD
Page 33 and 34: ■ Overview The full specification
Page 35 and 36: Operator control and monitoring iPC
Page 37 and 38: ■ Overview SERVER ROOM LOCAL ADMI
Page 39 and 40: Operator control and monitoring PCS
Page 41 and 42: Libraries/blocks/tools 6/2 MFL: Mod
Page 43 and 44: ■ Overview One outstanding featur
Page 45 and 46: ■ Overview The Standard Chemical
Page 47 and 48: ■ Overview The PCS 7 Scheduler pe
Page 49 and 50: Distributed I/O on the PROFIBUS 7/2
Page 51 and 52: ■ Overview Drive ES PCS 7 enables
Page 53 and 54: ■ Overview Distributed I/O on the
Page 55 and 56: ■ Technical specifications AddFEM
Page 57 and 58: ■ Overview The Ex Hubs, often ref
Page 59 and 60: Simulation 8/2 Introduction 8/3 SIM
Page 61: ■ Overview The system for field b
Page 67 and 68: Diagnostics 9/2 BANY: Bus analysis
Page 69 and 70: BANY PROFIBUS The bus diagnosis sup
Page 71 and 72: ■ Overview The operator in the co
Page 73 and 74: ■ Overview Whereas process contro
Page 75 and 76: Cabinet construction 10/2 Cabinet c
Page 79 and 80: ■ Options ■ More information Pr
Page 81 and 82: Clock time synchronization 11/2 SIC
Page 83 and 84: ■ Selection and Ordering Data Opt
Page 85 and 86: Migration 12/2 Gateway GT104CS: AS-
Page 87 and 88: Other 13/2 Siemens Fingerprint Mous
Page 89 and 90: Other PCS 7 Engineering Auditor ■
Page 91 and 92: Appendix 14/2 A&D Online Services 1
Page 93 and 94: .I In the face of harsh competition
Page 95 and 96: ■ Siemens Automation Solution Pro
Page 97 and 98: ■ 4 4-quadrants .................
Page 99 and 100: ■ Appendix Siemens ST PCS 7.1 ·
Page 101 and 102: ■ Appendix Siemens ST PCS 7.1 ·
Page 103 and 104: Automation and Drives Catalog Inter
show all

Catalog ST PCS 7.1 - September 2005

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?