Modular Multitrack Recorder - Tascam

More documents

Recommendations

Info

ANALOG INPUT & OUTPUT Connectors pinouts NOTES: 100 PIN # Signal Description PIN # Signal Description 1 Channel 8 + signal 14 Channel 8 - signal 2 Channel 8 ground 15 Channel 7 + signal 3 Channel 7 - signal 16 Channel 7 ground 4 Channel 6 + signal 17 Channel 6 - signal 5 Channel 6 ground 18 Channel 5 + signal 6 Channel 5 - signal 19 Channel 5 ground 7 Channel 4 + signal 20 Channel 4 - signal 8 Channel 4 ground 21 Channel 3 + signal 9 Channel 3 - signal 22 Channel 3 ground 10 Channel 2 + signal 23 Channel 2 -signal 11 Channel 2 ground 24 Channel 1 + signal 12 Channel 1 - signal 25 Channel 1 ground 13 No connection 1. 25-pin D-subminiature female connector (DB-25). The pinouts follow the Tascam DA-88 configuration. Each input is differential with the (+) inputs being the non-inverting input and the (-) being the inverting input. 2. Input impedance is 10k ohm. 3. Output impedance is 75 ohm. 4. Max load 12.28 VRMS BIPH (Biphase) Connectors pinout NOTES: PIN # Signal Description 1 Ground 2 Phase-A 3 Phase-B 4 Phase-B 5 Phase-A 6 Ground 1. RJ12 compatible Modular Plug, 6 Position, 6 Conductor.: Flat Wire - Stranded. Round Wire - Stranded. DataComm Warehouse (http://kerry.warehouse.com/) can supply these parts, however, many other sources available. 2. The four Biphase Inputs are selected one-at-a-time by the Sync Group setting. 3. Not intended for public telecommunication network. Tascam MMR-8 Owner’s Manual • Appendix D • Cable Information
DIO (AES/EBU Digital Audio) Connector pinout PIN # Signal Description PIN # Signal Description 1 Digital Output 4 (ch 7&8) + signal 14 Digital Output 4 (ch 7&8) - signal 2 Digital Output 4 (ch 7&8) ground 15 Digital Output 3 (ch 5&6) + signal 3 Digital Output 3 (ch 5&6) - signal 16 Digital Output 3 (ch 5&6) ground 4 Digital Output 2 (ch 3&4) + signal 17 Digital Output 2 (ch 3&4) - signal 5 Digital Output 2 (ch 3&4) ground 18 Digital Output 1 (ch 1&2) + signal 6 Digital Output 1 (ch 1&2) - signal 19 Digital Output 1 (ch 1&2) ground 7 Digital Input 4 (ch 7&8) + signal 20 Digital Input 4 (ch 7&8) - signal 8 Digital Input 4 (ch 7&8) ground 21 Digital Input 3 (ch 5&6) + signal 9 Digital Input 3 (ch 5&6) - signal 22 Digital Input 3 (ch 5&6) ground 10 Digital Input 2 (ch 3&4) + signal 23 Digital Input 2 (ch 3&4) - signal 11 Digital Input 2 (ch 3&4) ground 24 Digital Input 1 (ch 1&2) + signal 12 Digital Input 1 (ch 1&2) - signal 25 Digital Input 1 (ch 1&2) ground 13 No connection NOTES: 25-pin D-subminiature female connector (DB-25). SYNC (MMR-Bus) Connector pinout NOTES: PIN # Signal Description PIN # Signal Description 1 CAN_BUS+ 9 CAN_BUS- 2 CCLK_BUS0+ 10 CCLK_BUS0- 3 CCLK_BUS1+ 11 CCLK_BUS1- 4 CCLK_BUS2+ 12 CCLK_BUS2- 5 CCLK_BUS3+ 13 CCLK_BUS3- 6 +12 TERM PWR 14 Frame ground 7 CAN LEFT TERM 15 CAN RIGHT TERM 8 N/C 1. 15-pin D-subminiature female connector (DB-15). The two connectors are paralleled in the MMR-8 and either can be used as an input or output. 2. Tascam supplies a 3 foot interface cable, 70447. The differential signals should be routed on twisted pairs of wires. Tascam MMR-8 Owner’s Manual • Appendix D • Cable Information 101
Page 1 and 2:
» MMR-8 Modular Multitrack Recorde
Page 3 and 4:
IMPORTANT SAFETY INSTRUCTIONS CONSI
Page 10 and 11:
TEAC CORPORATION 3-7-3, Nakacho, Mu
Page 12 and 13:
Chapter 3 MMR-8 Operation..........
Page 14 and 15:
8 Appendix D: MMR-8 Cable Informati
Page 16 and 17:
The MMR-8 will directly play back m
Page 18 and 19:
Functional Overview The MMR-8 opera
Page 20 and 21:
14 Figure 1-3. MMR-8 Panel/Display
Page 22 and 23:
Electrical Ratings: 16 115 VAC @ 2A
Page 24 and 25:
General Guidelines Mounting Rack Ea
Page 26 and 27:
AC Mains and Grounding (Earthing) C
Page 28 and 29:
Audio Connections All audio inputs
Page 30 and 31:
Biphase Connections Biphase is a co
Page 32 and 33:
Serial Transport Connection The TRA
Page 34 and 35:
Powering Up the System The MMR-8 co
Page 36 and 37:
Factory Default Settings The MMR-8
Page 38 and 39:
32 Tascam MMR-8 User’s Guide •
Page 40 and 41:
Mode This term is used to refer to
Page 43 and 44:
Front Panel Indicators, Switches, a
Page 45 and 46:
Liquid Crystal Display (LCD) The LC
Page 47 and 48:
Slip Track State Display In the Sli
Page 49 and 50:
Front Panel Key Groups The MMR-8 fr
Page 51 and 52:
SHIFT+UP ARROW (TC/FEET) SHIFT+TRIM
Page 53 and 54:
SEL (TRACK SELECT) SHIFT+SEL (vario
Page 55 and 56: Insert Insert places the contents o
Page 57 and 58: Edit Sync Mode The setting chosen i
Page 59 and 60: SHIFT + LOAD TRACK (DELETE) As with
Page 61 and 62: Keypad Group These keys are located
Page 63 and 64: HEAD (SHIFT+8) NEXT EDIT (SHIFT+9)
Page 65 and 66: LOOP Pressing the Loop key prepares
Page 67 and 68: Basic Operation Loading and Mountin
Page 69 and 70: Once a track is loaded into a track
Page 71 and 72: Trimming Time Code Values Any time
Page 73 and 74: The Setup State & the Setup Menus C
Page 75 and 76: Setup Menu Chart This chart lists a
Page 77 and 78: MENU # MENU NAME PARAMETERS 301 Bip
Page 79 and 80: Setup Menu Details This section con
Page 81 and 82: The Lynx Bus The Lynx bus allows co
Page 83 and 84: Record Mode Menu 200, Record Mode,
Page 85 and 86: Chapter 5 MMR-8 System Applications
Page 87 and 88: Menu 300 is used to set the Biphase
Page 89 and 90: Chapter 6 Maintenance & Service The
Page 91 and 92: MIC Calibration Procedure Follow th
Page 93 and 94: For technical support on the MMR-8
Page 95 and 96: Appendix A: Control Panel Command S
Page 97 and 98: SHIFT+6 Locate to Previous Edit poi
Page 99 and 100: Appendix B: TASCAM MMR-8 Drive Comp
Page 101 and 102: Appendix C: WaveFrame Compatibility
Page 103 and 104: Appendix D: MMR-8 Cable Information
Page 105: TRANSPORT (Sony 9-pin) Connector pi
Page 109 and 110: VITC IN Connector NOTES: SERIAL CON
Page 111 and 112: Appendix E: MMR-8 Glossary Abbrevia
Page 113 and 114: Abbreviations and Terms Definitions
Page 115 and 116: Abbreviations and Terms Definitions
Page 117 and 118: Index 2 24-BIT REC LED ............
Page 119 and 120: In Point...........................
Page 121 and 122: Reverse Play Key...................
Page 123: Tascam MMR-8 Owner’s Manual • I
show all

Modular Multitrack Recorder - Tascam

Create successful ePaper yourself

Delete template?

Save as template?