Modular Multitrack Recorder - Tascam

More documents

Recommendations

Info

32 <strong>Tascam</strong> MMR-8 User’s Guide • Chapter 3 • MMR-8 Operation MMR-8
MMR-8 Keys & Definitions Chapter 3 MMR-8 Operation Throughout this manual several abbreviations and written shortcuts are used to define user operations and machine functions. The following summarizes how these abbreviations and text shortcuts relate to the operational description: Keys Refers to the colored front panel keys on the MMR-8. The gray keys are used to enter time code numbers (on the numeric keys) and to perform various other common functions. The red numbered keys are record enables, used to toggle tracks between record ready and safe modes. The shift key is the only yellow key. Key use in the text is indicated through capitalizing the key legends (e.g., LOAD TRACK indicates the Load Track key is to be pressed). Shift Key This key, the only yellow key on the front panel, functions like the shift key on a computer keyboard. Located at the top-right corner of the numeric keypad area, shift works in combination with selected gray keys, enabling their shifted functions. The shifted function for each applicable gray key is written above the key on the front panel metal. Press and release the shift key before pressing any other key, to “latch” the shift key until the desired key is pressed. This will light the shift LED above the SHIFT key. Pressing another key while the shift LED is on will cause that key to execute its shifted function. Once the shifted function has been activated, the shift LED will go off and the system will return to the normal non-shifted state. If multiple shifted keystrokes are required, you may also press and hold SHIFT (the shift LED above the key will stay on) while pressing one or more gray keys in succession. In the text “SHIFT+X” indicates the Shift key is used in combination with one of the gray keys (X) that has a shifted function. Thus, SHIFT+TRIM means “press and release (or press and hold) the SHIFT key and then press the TRIM key.” In this case, the MMR-8 will enter Dynamic Trim mode since the shifted function for the TRIM key is “Dynamic Trim” (which is indicated above the key). To cancel shift, when the shift LED indicator is on, press SHIFT again, or press CLR. Text Above Keys Indicates the “shifted function” for that key. Pressing SHIFT+ key, as detailed above, accesses the shifted function. Reversed Text Above Keys Indicates the “alternate” function for the JOG and SHTL keys, and for the STO, RCL and CLR keys. The alternate functions are used in Setup, Track, Verify, and Error modes, and while trimming values. In Normal mode, the key functions are normal (i.e., pressing JOG turns the Wheel into a Jog Wheel). In Setup or Track modes, pressing JOG indicates a left-arrow function as a cursor or window movement tool. MMR-8 <strong>Tascam</strong> MMR-8 Owner’s Manual • Chapter 3 • MMR-8 Operation 33
Page 1 and 2: » MMR-8 Modular Multitrack Recorde
Page 3 and 4: IMPORTANT SAFETY INSTRUCTIONS CONSI
Page 10 and 11: TEAC CORPORATION 3-7-3, Nakacho, Mu
Page 12 and 13: Chapter 3 MMR-8 Operation..........
Page 14 and 15: 8 Appendix D: MMR-8 Cable Informati
Page 16 and 17: The MMR-8 will directly play back m
Page 18 and 19: Functional Overview The MMR-8 opera
Page 20 and 21: 14 Figure 1-3. MMR-8 Panel/Display
Page 22 and 23: Electrical Ratings: 16 115 VAC @ 2A
Page 24 and 25: General Guidelines Mounting Rack Ea
Page 26 and 27: AC Mains and Grounding (Earthing) C
Page 28 and 29: Audio Connections All audio inputs
Page 30 and 31: Biphase Connections Biphase is a co
Page 32 and 33: Serial Transport Connection The TRA
Page 34 and 35: Powering Up the System The MMR-8 co
Page 36 and 37: Factory Default Settings The MMR-8
Page 40 and 41: Mode This term is used to refer to
Page 43 and 44: Front Panel Indicators, Switches, a
Page 45 and 46: Liquid Crystal Display (LCD) The LC
Page 47 and 48: Slip Track State Display In the Sli
Page 49 and 50: Front Panel Key Groups The MMR-8 fr
Page 51 and 52: SHIFT+UP ARROW (TC/FEET) SHIFT+TRIM
Page 53 and 54: SEL (TRACK SELECT) SHIFT+SEL (vario
Page 55 and 56: Insert Insert places the contents o
Page 57 and 58: Edit Sync Mode The setting chosen i
Page 59 and 60: SHIFT + LOAD TRACK (DELETE) As with
Page 61 and 62: Keypad Group These keys are located
Page 63 and 64: HEAD (SHIFT+8) NEXT EDIT (SHIFT+9)
Page 65 and 66: LOOP Pressing the Loop key prepares
Page 67 and 68: Basic Operation Loading and Mountin
Page 69 and 70: Once a track is loaded into a track
Page 71 and 72: Trimming Time Code Values Any time
Page 73 and 74: The Setup State & the Setup Menus C
Page 75 and 76: Setup Menu Chart This chart lists a
Page 77 and 78: MENU # MENU NAME PARAMETERS 301 Bip
Page 79 and 80: Setup Menu Details This section con
Page 81 and 82: The Lynx Bus The Lynx bus allows co
Page 83 and 84: Record Mode Menu 200, Record Mode,
Page 85 and 86: Chapter 5 MMR-8 System Applications
Page 87 and 88: Menu 300 is used to set the Biphase
Page 89 and 90:
Chapter 6 Maintenance & Service The
Page 91 and 92:
MIC Calibration Procedure Follow th
Page 93 and 94:
For technical support on the MMR-8
Page 95 and 96:
Appendix A: Control Panel Command S
Page 97 and 98:
SHIFT+6 Locate to Previous Edit poi
Page 99 and 100:
Appendix B: TASCAM MMR-8 Drive Comp
Page 101 and 102:
Appendix C: WaveFrame Compatibility
Page 103 and 104:
Appendix D: MMR-8 Cable Information
Page 105 and 106:
TRANSPORT (Sony 9-pin) Connector pi
Page 107 and 108:
DIO (AES/EBU Digital Audio) Connect
Page 109 and 110:
VITC IN Connector NOTES: SERIAL CON
Page 111 and 112:
Appendix E: MMR-8 Glossary Abbrevia
Page 113 and 114:
Abbreviations and Terms Definitions
Page 115 and 116:
Abbreviations and Terms Definitions
Page 117 and 118:
Index 2 24-BIT REC LED ............
Page 119 and 120:
In Point...........................
Page 121 and 122:
Reverse Play Key...................
Page 123:
Tascam MMR-8 Owner’s Manual • I
show all

Modular Multitrack Recorder - Tascam

Create successful ePaper yourself

Delete template?

Save as template?