User Guide - Kaspersky Lab

Protection against Internet fraud 137
Corporation. Depending on whether you trusted the application attempting
to access data from Storage, you can allow or block execution of this
operation.
Figure 45. Settings: Protection of Confidential Data
To configure settings for Protection of confidential data, take the following steps:
1. Open the application settings window and select Privacy Control under
Protection.
2. Check Enable Protection of Confidential Data and click Settings
under Protection of Confidential Data (cf. Figure 45).
In the Settings: Protection of Confidential Data window, select the
checkboxes across from the events that the module should monitor. To stop
monitoring an event, deselect the checkbox next to its name in the list.
To edit a rule for monitoring access to confidential data, select it from the list and
assign the settings for the rule in the lower part of the window:
• Define the reactions of the Privacy Control module for that event.
You can assign any of the following actions as a response: block, allow,
prompt for action, and terminate process. Left-click on the link with the
action until it reaches the value that you need. In addition to stopping the
process, you can quarantine the application attempting to access the
data. To do so, use the On / Off link across from the appropriate setting.
• Choose if you want to generate a report on the operation carried out. To
do so, use the On / Off link.