User Guide - Kaspersky Lab

294 Kaspersky Internet Security 7.0
Command syntax:
avp.com TRACE [file] [on|off] []
Parameter description:
[on|off] Enable/disable trace creation.
[file] Output trace to file.
This value can be an integer from 0 (minimum
level, only critical messages) to 700 (maximum
level, all messages).
A Technical Support will tell you what trace level
you need when you contact Technical Support. If it
is not specified, we recommend setting the level to
500.
Warning: We only recommend creating trace files for troubleshooting a specific
problem. Regularly enabling traces could slow down your computer and fill up
your hard drive.
Examples:
To disable trace file creation:
avp.com TRACE file off
To create a trace file to send to Technical Support with a maximum trace level of
500:
avp.com TRACE file on 500
20.11. Viewing Help
This command is available for viewing Help on command prompt syntax:
avp.com [ /? | HELP ]
To get help on the syntax of a specific command, you can use one of the
following commands:
avp.com /?
avp.com HELP