User Guide - Kaspersky Lab

Installing Kaspersky Internet Security 7.0 37
3.2.2.2. Entering the activation code
To activate the program, you must enter the activation code. When the
application is purchased through the Internet, the activation code is sent to you
via e-mail. In case of purchasing the application on a physical medium, the
activation code is printed on the installation disk.
The activation code is a sequence of numbers, divided by hyphens into four
groups of five symbols without spaces. For example, 11111-11111-11111-11111.
Please note that the activation code must be entered in Latin characters.
Enter you client number and password at the bottom of the window if you have
gone through the Kaspersky Lab client registration procedure and have this
information. Leave the fields blank if you have not registered yet. This way the
activation wizard will request your contact information and perform registration in
the next step. At the end of registration you will be assigned a client number and
a password which are required to obtain technical support. When using the
activation wizard to register, the client number may be viewed in the Support
section of the application main window (cf. Section 19.10, p. 278).
3.2.2.3. User Registration
This step of the activation wizard requires you to provide your contact
information: email address, city and country of residence. This information is
required for Kaspersky Lab Technical Support to identify you as a registered
user.
After the information is entered, it will be sent by the activation wizard to an
activation server, and you will be assigned a client ID and a password for the
Personal Cabinet on the Technical Support web site. Information on client ID is
available under Support (cf. Section 19.10, p. 278) in the application main
window.
3.2.2.4. Obtaining a Key File
The Setup Wizard connects to Kaspersky Lab servers and sends them your
registration data (the activation code and personal information) for inspection.
If the activation code passes inspection, the Wizard receives a key file. If you
install the demo version of the program, the Setup Wizard will receive a trial key
file without an activation code.
The file obtained will be installed into the application automatically, and an
“activation complete” window will be displayed for you with detailed information
on the key being used.