User Guide - Kaspersky Lab

Protection management system 65
Individual protection components are also disabled if your computer’s
real-time protection is stopped (see Section 6.1.2, p. 63).
6.1.4. Restoring protection on your
computer
If at some point you paused or stopped real-time protection on your computer,
you can resume it using one of the following methods:
• From the context menu.
To do so, select Resume protection.
• From the program’s main window.
Select the Protection section in the left-hand side of the main window
and click Enable Protection.
The protection status immediately changes to running. The program’s system
tray icon becomes active (color).
6.2. Advanced Disinfection
Technology
Advanced malware can infiltrate the lowest levels of the operating system which
makes them practically impossible to remove. When an active threat is
discovered on the system, Kaspersky Internet Security 7.0 suggests a special
extended disinfection procedure which will disable and remove the threat from
the computer.
Once the procedure is complete, the computer will have to be restarted. It is
recommended that a full virus scan be initiated after the computer is restarted.
To engage the Advanced Disinfection procedure, open the application settings
window, select Protection, and check Enable Advanced Disinfection
Technology (cf. Figure 6).
Figure 6. Configuring common settings