general product catalogue complete range of regulators
general product catalogue complete range of regulators
general product catalogue complete range of regulators
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT DESCRIPTION<br />
SAFETY DEVICES<br />
Pressure limiting device<br />
The pressure limiting device has a rated pressure that is greater than the<br />
rated pressure <strong>of</strong> the first stage regulator, so as to prevent it from activating<br />
during normal operation. The pressure limiting device activates only<br />
when the delivery pressure from the first stage regulator increases above<br />
acceptable levels, probably due to any rupture <strong>of</strong> the first stage regulator.<br />
MATERIALS<br />
- Body : Die Cast Zinc/Painted<br />
- Spring: : Steel<br />
- Diaphragms : Approved NBR<br />
GAS<br />
OUTLET PRESSURE<br />
(Depending on the gas)<br />
FIRST STAGE<br />
HIGH PRESSURE<br />
The Type 914P is a gas regulating assembly that consists <strong>of</strong> a first stage<br />
regulator and <strong>of</strong> a pressure limiting device.<br />
The first stage and the pressure limiting device are connected together by<br />
means <strong>of</strong> a permanent clinching system that guarantees utmost leak<br />
tightness. Installation <strong>of</strong> Type 914P should always be <strong>complete</strong>d by a<br />
second-stage regulator which further reduces the delivery pressure from<br />
the first-stage down to the operating pressure <strong>of</strong> the appliance.<br />
The Type 914P is supplied with a mounting bracket and protection cover.<br />
Type 914P is normally used in installations in compliance with NF French<br />
Standards. See diagram schematic: D-16 and D-23 (pages C08, C12) for<br />
installation system.<br />
- Homol. NF (France)<br />
Butane<br />
Propane<br />
HOMOLOGATIONS*<br />
High Pressure<br />
First Stage Regulator<br />
with Pressure Limiting Device<br />
Type 914P<br />
TECHNICAL FEATURES*<br />
CAPACITY<br />
(Depending on the gas)<br />
WORKING<br />
TEMPERATURE<br />
0,6 - 1,5 bar 2,6 - 8 Kg/h -20 ÷ +50 °C<br />
Part 1<br />
Part 1<br />
REGULATORS FOR<br />
DOMESTIC USE<br />
INSTALLATIONS<br />
DIMENSIONS<br />
INLET CONNECTIONS<br />
(pag. D04)<br />
TABLE E:<br />
E04<br />
* Note: The table shows all the variants <strong>of</strong> the configurations/technical features available for this type <strong>of</strong> regulator.<br />
Homologation in compliance with a standard / country will relate to a specific combination <strong>of</strong> connections, technical features and performance criteria.<br />
OUTLET CONNECTIONS<br />
(pag. D07)<br />
TABLE H:<br />
LH07<br />
www.cavagnagroup.com<br />
P.1/31<br />
EDITION JUNE 2003
Change language