general product catalogue complete range of regulators

EDITION JUNE 2003
SINGLE STAGE
MEDIUM PRESSURE
PRODUCT DESCRIPTION
The Type 713L is a non-adjustable single-stage medium-pressure
regulator with a threaded inlet connection for direct connection to
a cylinder valve. The Type 713L is constructed to control the prevailing
cylinder pressure reducing it directly down to the service
appliance pressure.
See diagram schematic: S-01 (page C17) for installation system.
- Homol. DVGW (German)
P.3/2
www.cavagnagroup.com
SAFETY DEVICES
Excess flow
The device “excess flow” assembled into the regulator operates by
limiting the gas flow in the event of a sudden increase in the desired
flow, as in the case of hose rupture or accidental disconnection
from the outlet of the regulator while in use. After actuation of the
“excess flow device” and removal of any failures, the safety device
must first be reset by hand pushing the reset button, to restore the
correct operation of the regulator.
HOMOLOGATIONS*
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
GAS
OUTLET PRESSURE
(Depending on the gas)
Medium Pressure
Single Stage Regulator
Type 713L
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
300 mbar
Butane/Propane 3 Kg/h -20 ÷ +50 °C
500 mbar
Part 3
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D01-D02-D04)
TABLE A:
A02 - A04 - A05 - A07
A08 - A20 - A29
TABLE D:
D02
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D07)
TABLE H:
H04