general product catalogue complete range of regulators

PRODUCT DESCRIPTION
The Type 51 is clip-on adapter with an inlet connection designed to fit
automatic/self closing cylinder valves. To fit the adapter to the gas cylinder,
first position the adapter on top of the automatic valve and then click
it simply by exerting some downwards pressure. Gas opening and closing
is done by a 1/4 turn of the adapter handle. The adapter Type 51 can be
connected to or removed from the automatic valve only if the adapter
handle is in the closed position (horizontal position).
The adapter Type 51 can be used for the direct connection of
industrial appliances, see installation schematics R-01 ( page C19) or to
adapt a regulator with threaded inlet into an automatc valve, see installation
schematics R-02 ( page C19).
Furthermore, the adapter Type 51 can be used in installations several
cylinders, with automatic valves, enabling the connection with the automatic
changeover or a manifold, see installation schematics R-03 and R-
04 ( page C19).
MATERIALS
- Body : Die Cast Zinc/Painted
GAS
Butane
Propane
Butane/Propane
SAFETY DEVICES
Thermal safety device
All the adapter models are generally equipped with a thermal safety device
(fuse) which shuts off the gas flow in case of fire in the vicinity of the
adapter/gas cylinder.
OUTLET PRESSURE
(Depending on the gas)
Adapters
Clip-On Type 51
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
WORKING
TEMPERATURE
- - -20 ÷ +50 °C
Part 4
ADAPTERS
INSTALLATIONS
DIMENSIONS
INLET CONNECTIONS
(pag. D03)
TABLE B:
B01 - B02 - B03 - B04 - B05
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D05-D06-D07)
TABLE F:
F04 - F09
TABLE G:
G02
TABLE H:
H01 - H02 - H04 - H09
H10 - H11 - H13 - H14
www.cavagnagroup.com
P.4/1
EDITION JUNE 2003