general product catalogue complete range of regulators

EDITION JUNE 2003
P.3/10
PRODUCT DESCRIPTION
www.cavagnagroup.com
High Pressure
Single Stage Regulator
Type 914L
SINGLE STAGE
HIGH PRESSURE
The Type 914L is a single-stage, high-pressure regulator, with a
threaded inlet connection for direct connection to a cylinder valve.
The Type 914L is constructed to control the prevailing cylinder pressure
reducing it directly down to the service appliance pressure.
See diagram schematic: S-01 (page C17) for installation system.
SAFETY DEVICES
Excess flow
The device “excess flow” assembled into the regulator operates by
limiting the gas flow in the event of a sudden increase in the desired
flow, as in the case of hose rupture or accidental disconnection
from the outlet of the regulator while in use. After actuation of the
“excess flow device” and removal of any failures, the safety device
must first be reset by hand pushing the reset button, to restore the
correct operation of the regulator.
On Request The Type 914L can be equipped with a gauge for outlet
pressure checking.
- Homol. DVGW (German)
GAS
Propane
Butane/Propane
ACCESSORIES
HOMOLOGATIONS*
OUTLET PRESSURE
(Depending on the gas)
1 - 1,5 - 2 - 2.5 - 4 bar
TECHNICAL FEATURES*
CAPACITY
(Depending on the gas)
6 - 8 - 14 Kg/h -20 ÷ +50 °C
Part 3
REGULATORS FOR
INDUSTRIAL AND
D.I.Y. USE
INSTALLATIONS
DIMENSIONS
MATERIALS
- Body : Die Cast Zinc/Painted
- Spring: : Steel
- Diaphragms : Approved NBR
WORKING
TEMPERATURE
INLET CONNECTIONS
(pag. D01-D02-D04)
TABLE A:
A01 - A02 - A05 - A07
A08 - A11 - A17 - A20
TABLE D:
D02
* Note: The table shows all the variants of the configurations/technical features available for this type of regulator.
Homologation in compliance with a standard / country will relate to a specific combination of connections, technical features and performance criteria.
OUTLET CONNECTIONS
(pag. D07)
TABLE H:
H04